J Jack's95gt Member Aug 15, 2004 443 1 18 Huntingdon Valley, PA Feb 9, 2008 #1 Feb 9, 2008 #1 I just bought an aluminum driveshaft and a universal driveshaft loop. The driveshaft is 3 1/2" wide and the loop is 4 1/2" wide. There isn't much room for plat here. Does the driveshaft have any side to side movement?
I just bought an aluminum driveshaft and a universal driveshaft loop. The driveshaft is 3 1/2" wide and the loop is 4 1/2" wide. There isn't much room for plat here. Does the driveshaft have any side to side movement?
faststang90 10 Year Member Nov 5, 2007 522 16 49 baytown texas Feb 9, 2008 #2 Feb 9, 2008 #2 drive shaft it just moves up and down but not alot the loop should be closer to the tranny
1991vert 10 Year Member Feb 27, 2004 1,103 7 69 Ludlow, MA Feb 9, 2008 #3 Feb 9, 2008 #3 i think the loop has to be no more than a few inches back from the u-joint
R rustydailey New Member Apr 1, 2005 3 0 0 Feb 9, 2008 #4 Feb 9, 2008 #4 It has to be installed no more than 6" from the U joint.