• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Dropped in to 13's for the quarter mile

  • Thread starter Thread starter Pops Fun
  • Start date Start date Apr 25, 2004
  • 1
  • 2
Next
1 of 2 Next Last

Pops Fun

10 Year Member
Feb 15, 2003
961
14
59
Cincinnati, Ohio
Apr 25, 2004
#1
  • Apr 25, 2004
  • #1
Hi,
Made 5 runs and various mistakes. 2 Runs dropped me to the high 13s and the best time was13.89.
Timeslip for 13.89
http://members.nuvox.net/~zt.steveh/mustang/3 timeslip.html

Four of the slips are at: http://members.nuvox.net/~zt.steveh/mustang/Timeslip_april.html

High Flow cats and Drag radials are the only changes between 14.71 and 13.89 Iam a Happy Man.
 

1105

I AM the random post master...bow down
May 3, 2003
3,841
0
0
Daytona Bch, FL
Apr 25, 2004
#2
  • Apr 25, 2004
  • #2
You knocked off .9 off of your time, and only gained 2mph? How the hell did you do that with just cats? How many times did you take it to the track with your old setup? Still need a little more practice with thoes DR's
 
9

95StocK50

New Member
Dec 19, 2002
398
0
0
Idaho
Apr 25, 2004
#3
  • Apr 25, 2004
  • #3
damn what were your 60's without the dr? they must have been horrible to drop that much.

nathan
 

BlueOvalStangGT

Active Member
Oct 27, 2003
2,849
0
46
Tampa Florida....USF!!!
Apr 25, 2004
#4
  • Apr 25, 2004
  • #4
woah, thats pretty close to my time. what are all your mods? i ran a 13.87 at 99.4 mph.
 

Pops Fun

10 Year Member
Feb 15, 2003
961
14
59
Cincinnati, Ohio
Apr 25, 2004
#5
  • Apr 25, 2004
  • #5
BlueOvalStangGT said:
woah, thats pretty close to my time. what are all your mods? i ran a 13.87 at 99.4 mph.
Click to expand...

My whole setup was being held back by the 4 cats on my H-pipe?? If I could only launch it better!


Under Drive Pullies, Ford 3.73 Gear, Steeda Tri-Ax, Flowmaster Exhaust, Mac Shorty Header, TFS TW Heads, Steeda 19 Cam, Cobra Intake, FMS 65mm T/B, Pro-M 75MM MAF, Steeda 24# injectors, 1.7 Roller Rockers, MSD 6al, Blaster coil,
New: High Flow Catted H-Pipe and Drag Radials, Time down to 13.89 YEA!!!!!!!!!
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
Apr 25, 2004
#6
  • Apr 25, 2004
  • #6
I'm happy for you in that your into the 13's, however with your mods I still don't understand why you are not running at least 81-82mph in the 1/8th and ~103-104 in the 1/4. With that much HP and such I think you should be.
 

Pops Fun

10 Year Member
Feb 15, 2003
961
14
59
Cincinnati, Ohio
Apr 25, 2004
#7
  • Apr 25, 2004
  • #7
Killercanary said:
I'm happy for you in that your into the 13's, however with your mods I still don't understand why you are not running at least 81-82mph in the 1/8th and ~103-104 in the 1/4. With that much HP and such I think you should be.
Click to expand...

Wellll,
I did not take anything out of the car spare tire, still air conditioned, still have the 25lb weight in the front etc. could that be it.


Steve
 

BlueOvalStangGT

Active Member
Oct 27, 2003
2,849
0
46
Tampa Florida....USF!!!
Apr 25, 2004
#8
  • Apr 25, 2004
  • #8
Pops Fun said:
Under Drive Pullies, Ford 3.73 Gear, Steeda Tri-Ax, Flowmaster Exhaust, Mac Shorty Header, TFS TW Heads, Steeda 19 Cam, Cobra Intake, FMS 65mm T/B, Pro-M 75MM MAF, Steeda 24# injectors, 1.7 Roller Rockers, MSD 6al, Blaster coil,
New: High Flow Catted H-Pipe and Drag Radials, Time down to 13.89 YEA!!!!!!!!!
Click to expand...
i think you shouuld be doing better then that with those mods. we have similar mods excpet you have h/c. have you every dynoed the car? my mods are underdrives,3.73s, upr shifter,flowmaster 3 chambers, o/r x pipe, cobra intake, subframes, eibach springs(bad) and nitto drags. only thing i have better then you is the nitto drag radials but i sure hope heads and cam should more then make up for that/
 

BlueOvalStangGT

Active Member
Oct 27, 2003
2,849
0
46
Tampa Florida....USF!!!
Apr 25, 2004
#9
  • Apr 25, 2004
  • #9
whoops didnt notice yous was a vert, that may even it out a little more
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
Apr 25, 2004
#10
  • Apr 25, 2004
  • #10
Pops Fun said:
Wellll,
I did not take anything out of the car spare tire, still air conditioned, still have the 25lb weight in the front etc. could that be it.


Steve
Click to expand...


Steve, I don't think so. I ran 13.83 at 98.55mph with the stock heads and cam, AC, 25lb weight (I think), but without the spare and jack. However, I had the body kit, chrome wheels, and chrome roll bar at the time. That is why I think your times are off. You need to keep practicing the launch on the DR's and learn to slip the clutch out so as to not shock the tires, if you shock them they will unload and spin. I cut a 1.91 60' on that 13.83 run. That is the key to running well on Dr's, slipping the clutch. What is the track elevation? What is your shift point? The nice thing is that it seems you still have a lot of potential in the car, but don't fret. A buddy of mine has a 94GT with TW heads, E303 cam, and a cobra intake. He kept saying it was a 12 second car, that was until we went to the track together. He was stuck running like 14.1-14.0 at 98-100mph all day. I never sat in his car let alone drove it, but he asked me to make a pass in it. On my first and only pass I clicked off a 13.6 at 105mph, but I drag race a lot. I think with more practice and playing with shift points and such your times will continue to fall. GOOD LUCK!!!
 

WhiteDevil

New Member
Feb 4, 2003
2,717
0
0
San Diego
Apr 25, 2004
#11
  • Apr 25, 2004
  • #11
Yeah i second the shift points. Hard launch or no hard launch u should be traping at least 103 with those mods. Dont be scared to take it to 5,800-6,000 thats where it needs to go to make power, and drop back into the power band for the next gear.
 

Black95GTS

Active Member
Jan 8, 2004
1,644
3
38
Marlborough, MA
Apr 25, 2004
#12
  • Apr 25, 2004
  • #12
I bet if you tossed a Tweecer or something similar in, you'd notice a big difference. But crackin 14's is awesome, well done!
 

BlackenedSVT

Active Member
Jan 18, 2004
1,841
7
38
New Jersey
Apr 25, 2004
#13
  • Apr 25, 2004
  • #13
im kinda surprised you have 281rwhp and doing only high 13's.
 

Stump1000

New Member
Apr 5, 2003
495
0
0
Morristown Tn
Apr 25, 2004
#14
  • Apr 25, 2004
  • #14
yeah, the mods dont equal out.. do you let off the gas to shift?
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
Apr 25, 2004
#15
  • Apr 25, 2004
  • #15
Stump1000 said:
do you let off the gas to shift?
Click to expand...

I do and I don't think its hurting me at all. I don't think that's the main problem though with his times.
 
3

306stang

Founding Member
May 11, 2001
64
0
0
Owensboro, KY
Apr 25, 2004
#16
  • Apr 25, 2004
  • #16
I agree i think he should be having high low 13 to high 12 sec time slips with 281rwhp. You need to work on your launch and so forth. 2.2 60ft time man that's kinda high for drag radials you should be able to cut at least 1.8-1.9's with those.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Apr 25, 2004
#17
  • Apr 25, 2004
  • #17
what kind of timing etc. do you run on that thing. like 0 or what. I think with twisted wedge heads you should be shifting at around 6000 right? And power shifting does not make that big a diff. when i went to the track last i did on one run and didn't on the other only made like a .1 diff. with sim reaction and 60 ft times.


I am with paul i think something is iffy. As you ask me paul what were the temps his car was running etc. What were your shift points, what elevation, were you at WOT? I hope when i have the HCI done on mine, that it does a little better than that, but with my luck it will not!!!!!!!!
 

Pops Fun

10 Year Member
Feb 15, 2003
961
14
59
Cincinnati, Ohio
Apr 25, 2004
#18
  • Apr 25, 2004
  • #18
Killercanary said:
Steve, I don't think so. I ran 13.83 at 98.55mph with the stock heads and cam, AC, 25lb weight (I think), but without the spare and jack. However, I had the body kit, chrome wheels, and chrome roll bar at the time. That is why I think your times are off. You need to keep practicing the launch on the DR's and learn to slip the clutch out so as to not shock the tires, if you shock them they will unload and spin. I cut a 1.91 60' on that 13.83 run. That is the key to running well on Dr's, slipping the clutch. What is the track elevation? What is your shift point? The nice thing is that it seems you still have a lot of potential in the car, but don't fret. A buddy of mine has a 94GT with TW heads, E303 cam, and a cobra intake. He kept saying it was a 12 second car, that was until we went to the track together. He was stuck running like 14.1-14.0 at 98-100mph all day. I never sat in his car let alone drove it, but he asked me to make a pass in it. On my first and only pass I clicked off a 13.6 at 105mph, but I drag race a lot. I think with more practice and playing with shift points and such your times will continue to fall. GOOD LUCK!!!
Click to expand...

Hi,
I am trying to get better, only been to the track 3 times, 2 last year and yesterday. The track is around 900 ft elevation. I was shifting around 5800 using the stock tach. I was shifting into 4th before the end. A couple time the tach showed about 6100 or 6200 between shifts.

Still practicing, Steve
 

Pops Fun

10 Year Member
Feb 15, 2003
961
14
59
Cincinnati, Ohio
Apr 25, 2004
#19
  • Apr 25, 2004
  • #19
306stang said:
I agree i think he should be having high low 13 to high 12 sec time slips with 281rwhp. You need to work on your launch and so forth. 2.2 60ft time man that's kinda high for drag radials you should be able to cut at least 1.8-1.9's with those.
Click to expand...

I'll keep practicing those launches I realize that there is a couple tenth in reaction time.
Steve
 

Stump1000

New Member
Apr 5, 2003
495
0
0
Morristown Tn
Apr 25, 2004
#20
  • Apr 25, 2004
  • #20
I know you dont powershift paul. When done correctly it does help..., You probably shift fast though. It takes some people forever to shift. I hear it at the track all the time. Makes a big difference when they drive like that
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

J
1/4 Help Please
  • jon94vert
  • Sep 21, 2016
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 22, 2016
mikestang63
  • Locked
Expired 2007 Mustang Gt Supercharged Mammoth, 63983 Miles, 3-4k Mile Motor
  • Chad W.
  • Sep 26, 2015
  • S197 Mustangs For Sale (2005-14)
Replies
4
Views
5K
S197 Mustangs For Sale (2005-14) Oct 12, 2016
Chad W.
M90 root blower how to info
  • 1987LXragtop
  • Jan 7, 2011
  • SN95 V6 Mustang Tech
Replies
1
Views
8K
SN95 V6 Mustang Tech Jan 7, 2011
1987LXragtop
YEAH!!!! FINALLY GOT THIS HEAP IN THE 12s!!!!
  • 85_SS_302_Coupe
  • Aug 16, 2008
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
28
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 20, 2008
85_SS_302_Coupe
New best ET
  • UrbanRedneck
  • Aug 24, 2008
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
2
Views
630
2005 - 2014 S-197 Mustang -General/Talk- Aug 24, 2008
UrbanRedneck
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?