dry looking door handle

Roland69 · May 27, 2007

The door handles on my car are some sorta plastic. They are starting to look light grey from being dry. Have any of you guys found anything that makes them look black again. I tried some tire foam stuff last year and it worked for a bit but not that long..

85_SS_302_Coupe · May 27, 2007

Try "Back to Black" by Mothers. It couldn't completely restore the fenders on my Cherokee but it did a damn good job trying.

But, if you ask me, you might just look for metal handles and swap them out, and maybe throw a layer of black paint on them before you do. You're gonna be real pissed when one of them break..lol. Hell being in Canada i'm surprised you haven't already...every one i've broke was in the winter.

Roland69 · May 27, 2007

my car goes in storage way before the snow flies. I put it away in sept or Oct and bring it out in may..I'll have to get me some of that Back to Black

mustangjoe87 · May 27, 2007

Tape off the door and spray them with SEM trim black

Roland69 · May 27, 2007

are the handles easy to take off

Foxfan88 · May 27, 2007

easy to swap out, just 2 rivets hold them on, you have to take the door panel off, remove the metal rod from the handle, drill the rivets out and rivet the new ones on, then put the metal door rod back in place. and your good to do.

i bought the black metal handles from 5.0 resto they are a nice gloss black and last longer.

Turkey Sammich · May 27, 2007

Foxfan88 said:
easy to swap out, just 2 rivets hold them on, you have to take the door panel off, remove the metal rod from the handle, drill the rivets out and rivet the new ones on, then put the metal door rod back in place. and your good to do.

i bought the black metal handles from 5.0 resto they are a nice gloss black and last longer.

I bought the black metal door handles from 5.0 resto, a few months ago. Fairly cheap and looks great.

rigamaroles · May 27, 2007

turtle wax ice does a nice job too.

cenok is family · May 27, 2007

i just put new metal ones on my car about 4 days ago. now i'm not afraid to open my doors anymore! my passenger side was already broke and my driver side was definitely going to sooner than later. i didn't rivit them back on, i used bolts so i wouldn't have to drill again if something happens. go with some metal ones man. i got a pair off ebay for $20 shipped.

DEFWISH · May 27, 2007

black metal handles ftw...

90blacknight · May 27, 2007

Careful if you're going to use the rivet gun to replace the door handles. That thing can kick like a mule. Protect the surrounding and have someone hold the handle in place while you crank on the rivet gun. No way you can do this yourself and get them perfectly straight. Been there done that.

glowstang93 · May 27, 2007

mustangjoe87 said:
Tape off the door and spray them with SEM trim black

The handles are easy to mask around, sand lightly and then hit with spray can. No reason to change the handles unless your just wanting new or something different. Will last much longer than using a protectant.

Roland69 · May 27, 2007

Thats what I'll probly doo. I might even take my mirrors off and paint them too

SVT32VDOHC · May 30, 2007

Duplicolor flat black paint works wonders!!

stykthyn · May 30, 2007

hell, if you are going to take the door panel off to paint the mirrors, you may as well get metal door handles and swap them out. the 5.0 resto ones are nice and heavy.
HELP also makes a metal handle, but they are like 25 a pop.

SVT32VDOHC · May 30, 2007

There is a huge markup on those. I buy them from my wearhouse for $3.90 a peice. I will usually sell them for 15 each, but most times I try to get 25.

dry looking door handle

Roland69

Sergeant Tangnet

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

Roland69

Sergeant Tangnet

mustangjoe87

Member

Roland69

Sergeant Tangnet

Foxfan88

My Grandpa has great wood.

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle

rigamaroles

New Member

cenok is family

DEFWISH

Member

90blacknight

Member

glowstang93

Roland69

Sergeant Tangnet

SVT32VDOHC

waiting for the next hack atta

stykthyn

I want to measure mine. It doesn't look that tall.

SVT32VDOHC

waiting for the next hack atta

Similar threads

dry looking door handle

Sergeant Tangnet

it sucks (I know) to be on the receiving end

Sergeant Tangnet

Member

Sergeant Tangnet

My Grandpa has great wood.

I can't fap normal. I cracked a rib, then my ankle

New Member

Member

Member

Sergeant Tangnet

waiting for the next hack atta

I want to measure mine. It doesn't look that tall.

waiting for the next hack atta

Similar threads

Privacy & Transparency

Privacy & Transparency