Dumb simpley question. How do to remove the Pully from the Power steering pump?

That is a pressed on pulley, you need a pulling tool to get it off. They cah be a serious ****** sometimes!

You can go to Autozone (possibly other auto parts stores also) and rent there puller and installer for something like $1.

This is what you need for pulling the pulley.
View attachment 484162

When you get ready to install the new pulley you'll need this.
View attachment 484164

March performance carries a polished PS pulley.

A.S. is totally right on. And BE sure to use the install tool (that bolt they sometimes give you is not a good way to install the pulley).

FWIW, the ID on the pulley-hub can mushroom a bit from use; if yours looks pooey, it might be time fro a fresh pulley.

Good luck.

Yep, you need the remover tool. They are cheap enough now to just buy one. I also agree with the recommendation for the installer tool, as I have had the bolt they give you to install the new on break in mid install.

Most parts shops will r&r the pulley if you buy the pump there. But ask them first!