Dyno numbers tomorrow! Getting Excited!
- Thread starter kkdoughboy
- Start date
onebad95
Sherriff of Bling King County
blacksheep06
New Member
- Jan 31, 2006
- 288
- 0
- 0
I'm getting mine dynoed within the next month at MPH in Atlanta. I'm just waiting on the LT's to be installed.
I'm going to have a long high speed drive to get there, so how can I cool off the engine in a hurry once I get there?
I'm not hijacking the thread, just thought it might be relevant.
I'm going to have a long high speed drive to get there, so how can I cool off the engine in a hurry once I get there?
I'm not hijacking the thread, just thought it might be relevant.
blacksheep06
New Member
- Jan 31, 2006
- 288
- 0
- 0
Yea that sounds good. How about a bag of ice on the intake manifold as well? I've heard guys talk about using ice at the track to cool down.
Hi guys, I forgot to mention I'm having pulleys installed on it before the dyno. Probably wont affect numbers by much but who knows. I'm running it with the 20's which will hurt my numbers, I know. The guy said he would look and see if he can find some 17's to throw on there to get more accurate numbers but I havent heard back on that. I should be posting the final numbers tonight. Thanks all!
kooldawg6
mine works really well and can take a fair amount
I'm curious to if anybody has done back to back pulls after a wheel swap to see how much of a difference it makes.
Numbers are in! RWHP 297.2 / RWTQ 315. The guy couldnt get a smaller rim to measure the difference but he told me I lost 20 hp with my heavy as all heck 20's. Sorry about that guys I wish he would've been able to do that. Turns out the 93 Octane tune from Brenspeed was spot on and he didnt custom tune it. I know he probably could've got me above 300 but he didnt want to take the time. He's a contractor who has a dynojet. I am hoping to somehow get the graph posted. I will figure it out but it's guys night and I'm drinking with my buddies and getting ready to play Halo 3. I will follow up later. Have a good night
Casey4s
New Member
Casey4s
New Member
spydershaft not installed yet. i'm still waiting on that. I found a guy who will install the DS and 4.10's for $450. Gonna happen soon
Cool ...
With the SpyderShaft you should free up a few more parasitc HP and push you well over 300 RWHP.
I got 4.10's, a girdle and a Spydershaft yesterday. The DS is a fine piece of work and well worth the conservative price. That stock shaft is one really heavy POS.
In respect with the question about larger heavier wheels robbing hp. I talked to the dyno tuner about this and he said that the heavier the wheel the worse your numbers will be and that diameter also affects this as well. He showed me a couple dyno graphs to prove this fact although I dont have copies to post. A Ford Lightning pickup with some mods and stock wheels tires dyno'd at 400rwhp. The customer then purchased 20's in chrome like mine and dyno'd at 360 rwhp. He lost 40 hp to the wheels with no changes other than larger heavier wheels. Guess they do make a difference.
Its alright, when we all get enough money we will have our 20"s and our own set of deep dish racin rims!
AquaTeen2004
New Member
kooldawg6
mine works really well and can take a fair amount
I don't see why diameter affects the readings. I can certainly understand the added weight. If you put on a set of lightweight 20s(Steeda has their 20" Ultra-Lite Silver Wheel)and have very similar to stock size tire height, it should be similar readings. Say compared to the factory 18s. Prettynice #s considering the heavy wheels.
One thing to remember is that spyder7724 is putting just under 300 to the rear wheels, but is running 12.0s N/A
That is one case of getting every available pony to the track
One thing to remember is that spyder7724 is putting just under 300 to the rear wheels, but is running 12.0s N/A
That is one case of getting every available pony to the trackMy wheels arent the same diameter as the stock wheels. They're also chrome and are really heavy. Not like the Steeda ultralight wheels. I wish they were however. I have 20"X10" 295/40/20's and there about a 1/2 " or more larger in diameter. I put a set of 17's from an 01 GT over my wheels to measure this difference and it was considerable considering the series I'm running. I thank you for the compliments on the numbers. I'm hoping that with the Spydershaft DS and the 4.10's I'm gonna install I'll get over 300 on the dyno. Later
