My mods:
CHP street fighter pro street 347, .509/.532 222/232 (112), AFR 185cc x 61cc, all forged internals, 10:1, main girdle, windage tray, MSD ignition/dizzy/wires/coil, fluidyne rad, canton overflow, ceramic bbk shorty headers, 3.73, 30lb squirt, 255 fuel pump, c&l true flow pipe, 90mm lmaf, edelbrock performer intake ported lower, flowcooler highflow waterpump, romac 28oz balancer, underdriven crank pully, oil/tranny coolers, new ac pump/hoses/accumulator, 200amp alt, plx m-300 wideband o2 air/fuel monitor, autometer phantom oil temp/oil pressure/tranny temp/water temp, transgo shift kit, b&M deep tranny pan, 70mm tb, bbk intake spacer, high volume oil pump, magnaflow h-pipe with highflow cats, flowmasters, autopower 4 point, kirban adjustable fpr, subframe connectors, aluminum wire looms, aluminum driveshaft, tokico shocks, thats about all I can think of right now.
My Dynotune:
Did Steve take my money and run, or did he do the best he could with what he had to work with?!?! That is my question to you. I go back tomorrow because i have an idle surge that happens occasionally which causes me to have to start the car like 7-8 times and slam it in gear to get it to run. Something he should have tuned out the first time.
CHP street fighter pro street 347, .509/.532 222/232 (112), AFR 185cc x 61cc, all forged internals, 10:1, main girdle, windage tray, MSD ignition/dizzy/wires/coil, fluidyne rad, canton overflow, ceramic bbk shorty headers, 3.73, 30lb squirt, 255 fuel pump, c&l true flow pipe, 90mm lmaf, edelbrock performer intake ported lower, flowcooler highflow waterpump, romac 28oz balancer, underdriven crank pully, oil/tranny coolers, new ac pump/hoses/accumulator, 200amp alt, plx m-300 wideband o2 air/fuel monitor, autometer phantom oil temp/oil pressure/tranny temp/water temp, transgo shift kit, b&M deep tranny pan, 70mm tb, bbk intake spacer, high volume oil pump, magnaflow h-pipe with highflow cats, flowmasters, autopower 4 point, kirban adjustable fpr, subframe connectors, aluminum wire looms, aluminum driveshaft, tokico shocks, thats about all I can think of right now.
My Dynotune:
Did Steve take my money and run, or did he do the best he could with what he had to work with?!?! That is my question to you. I go back tomorrow because i have an idle surge that happens occasionally which causes me to have to start the car like 7-8 times and slam it in gear to get it to run. Something he should have tuned out the first time.
