S stang4wade New Member Nov 29, 2010 4 0 0 Nov 29, 2010 #1 Nov 29, 2010 #1 Is there an easy way to get to the computer for removel? I can not seem to figure out away to get thing out. Thanks Wade
Is there an easy way to get to the computer for removel? I can not seem to figure out away to get thing out. Thanks Wade
S stang4wade New Member Nov 29, 2010 4 0 0 Nov 29, 2010 #2 Nov 29, 2010 #2 I Found a post, great site. Thanks Wade
NIKwoaC 中國製造 15 Year Member Oct 31, 2006 5,500 914 214 Chengdu Province Nov 29, 2010 #3 Nov 29, 2010 #3 It's pretty straight forward, you shouldn't have too much trouble with it.
188slo50 Member Oct 14, 2009 52 0 7 Nov 29, 2010 #4 Nov 29, 2010 #4 IT should be just a simple pop the kick panel and use a 10mm socket to remove the hold down nut.
jrichker StangNet's favorite TOOL In Remembrance. Thank you for your contributions Mar 10, 2000 27,513 2,864 234 Dublin GA Nov 29, 2010 #5 Nov 29, 2010 #5 Why do you need to remove the computer? They almost never die. Usually it is a sensor, relay or actuator that quits working. The computer is smart enough to diagnose the problem if you jumper it into diagnostic mode.
Why do you need to remove the computer? They almost never die. Usually it is a sensor, relay or actuator that quits working. The computer is smart enough to diagnose the problem if you jumper it into diagnostic mode.
wythors Get off my lawn!!! Founding Member May 17, 2000 2,277 35 69 C Addle Nov 30, 2010 #6 Nov 30, 2010 #6 jrichker said: Why do you need to remove the computer? Click to expand... I ported the connector on mine and polished the case. Picked up three tenths and 6 mph in the quarter.
jrichker said: Why do you need to remove the computer? Click to expand... I ported the connector on mine and polished the case. Picked up three tenths and 6 mph in the quarter.
Maryland Stang Active Member Aug 21, 2002 1,656 29 39 Greenville, NC Nov 30, 2010 #7 Nov 30, 2010 #7 wythors said: I ported the connector on mine and polished the case. Picked up three tenths and 6 mph in the quarter. Click to expand...
wythors said: I ported the connector on mine and polished the case. Picked up three tenths and 6 mph in the quarter. Click to expand...
NIKwoaC 中國製造 15 Year Member Oct 31, 2006 5,500 914 214 Chengdu Province Nov 30, 2010 #8 Nov 30, 2010 #8 wythors said: I ported the connector on mine and polished the case. Picked up three tenths and 6 mph in the quarter. Click to expand... Haha, now we're talking.
wythors said: I ported the connector on mine and polished the case. Picked up three tenths and 6 mph in the quarter. Click to expand... Haha, now we're talking.