Build Thread - Enola-Black Fox - the 4r70 saga continues
Welcome to my laboratory from this point forward is the m90 portion of the experiment. To jump ahead to my M112 install use this link. https://www.stangnet.com/mustang-forums/threads/frankenstang-m112-blower-install-installing-the-blower.884767/page-66 Enjoy Hi all I have been away for a...www.stangnet.com
I did both a remote mount m90 and a m112 on top of the engine between the valve covers.... I actually still have most of the stuff for the m90 project.
Would uou have a link to thatthe m90 will need to be trimmed down substantially to remote mount it in any way.... now there is a guy on corral that did one over one valve cover.
I didn’t want it to be a dig at you because i respect your work and knowledge big time .100% the M90 is way too small. the m112 can do the job though but lots of work
I'll add my .02, now it's almost a nickle.Unless you are really good at fab work or like the challenge I see no point in this . No offense to anyone but they are small heat machines . Better off with a used Vortech or procharger kit or a cheaper turbo kit. More gain for the money
You will not be into the project for the price of the blower or the man hours to make it work . Just my .02
Yeah that's what am afraid of the Fab work, not so much about the power as it is the looks and sound of it might give it a shot anyway worst case scenario Ill have a pro take over for me.Unless you are really good at fab work or like the challenge I see no point in this . No offense to anyone but they are small heat machines . Better off with a used Vortech or procharger kit or a cheaper turbo kit. More gain for the money
You will not be into the project for the price of the blower or the man hours to make it work . Just my .02
with the one m90... over spun to the moon I made 10psi at 3k rpm with iron heads that netted me 400rwtq, by 5k i was down to 6psi and it made 330hp.
the m112 made 11-12 psi with a 7.21 lower and 2.8 upper pulleys at redline, 2k would make 8psi. I never took it to the dyno with that setup. Alex on corral made in the 700+ range with the same blower on a 363
Most people are happy with 330hp until they have 330hp.I'd happy with the 330hp all day I don't want to go too wild, its still gonna be my daily work car.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?