edelbrock intake bolts for install

S

saleener94

Member

Apr 24, 2006

153

1

17

Compton,CA

Jul 29, 2010

#1

• Jul 29, 2010

• #1

will these be ok when i install my performer edelbrock intake. I noticed that the ones edelbrock suggest are longer looking than these but i like these.



ARP 454-2001 - ARP Stainless Steel Intake Manifold Bolt Kits - Overview - SummitRacing.com

 

R

red1995gts

New Member

Dec 1, 2008

42

0

0

Jul 30, 2010

#2

• Jul 30, 2010

• #2

Edelbrock 8524 Edelbrock Intake Manifold Bolts i used these edelbrock ones with no problems

 

hollywoodstang

Active Member

May 23, 2006

1,095

2

36

Jul 30, 2010

#3

• Jul 30, 2010

• #3

Please do yourself a favor and run the studs. It makes installing gaskets manifold lot easier. I got mine from ARP, Summit has them, Price is good too

 

S

saleener94

Member

Apr 24, 2006

153

1

17

Compton,CA

Jul 31, 2010

#4

• Jul 31, 2010

• #4

so then the ARP's won't fit?

 

hollywoodstang

Active Member

May 23, 2006

1,095

2

36

Jul 31, 2010

#5

• Jul 31, 2010

• #5

It will work, But i prefer "Studs" instead of "Bolt" because you can line the gasket easier and gasket won't move around when you are setting the manifold down etc etc

 

Venom351R

Founding Member

Apr 27, 2002

4,548

41

98

MAINE

Jul 31, 2010

#6

• Jul 31, 2010

• #6

I used these when the lower edelbrock intake was installed.


http://www.summitracing.com/parts/EDL-8584/

I also have a set of APR bolts that are not being used for anything now b/c I used the edelbrock ones instead.

 

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

Aug 1, 2010

#7

• Aug 1, 2010

• #7

You can just cut up a piece of all thread and use the sections to keep
things nice and straight when you drop down the lower

Then use bolts to chinch it down tight

Grady