edelbrock vs kenne bell

JDM has done fantastic things with the Roush TVS 2300. They put them on stock motors with a mild tune and get around 500 RWHP and I think they are the best looking setup.

The edelbrock is nifty but it has a relatively narrow application and power capability due to only accepting the edelbrock single round throttle body.

I recently read on another forum a guy putting a 2.8H on a stock block. Not the most efficient setup for power, but he wanted to be able to go forged and high boost in the future but wanted the joy of boost now.

I think the setup netted him about 450 rwhp and a good path to massive boost later. I wish I'd done that.

-----------------
(My Signature - since I can't have a system inserted one...)
'08 GT
KB Intercooled 2.6L SC @ 9 psi / ARH 1.75 w/catted x-pipe / SPEC Stage 3+
Brembo (GT500) / Eibach Pro Springs / MGW / BMR LCA/UCA, Adj Panhard Bar
SOS Tri-Pod A-Pillar / WB AF, FP, Boost/VAC / Raptor Dual Mode
Shelby Razor (20x9, 12mm o/s) Agent 47 Mirrors / Shelby Hood Pins / Seq Tail Lights

KB makes a great kit

I've got a 2.6l intercooled KB kit on my '05. It's a very high quality kit with clear, detailed instructions. The car makes great power - 463 rwhp (about 530 at the flywheel) with a 91 octane tune and the standard pulley. With any more power I'd need to upgrade the clutch and drive shaft, and to go even higher I'd need to replace engine components. The supercharger is capable of up to 675 hp with smaller pulley and more aggressive tune.

The system, and car in general, have been perfectly reliable despite my heavy right foot. I can't say enough about the quality and performance of KB's system, and the knowledge of their tech staff.

I'm sure that the Edlebrock kit is also good, but how long has it been out? KB's has been extensively tested by many enthusiasts.

Shelby relies on Mammoth power for the Super Snake. That unit's capable of crazy power.

I don't work for KB, I'm just a happy customer. If it was my ride and $$$, I'd go with the Mammoth kit, have it tuned and pulleyed for the stock engine, and have built-in expandability with just pulley and tune later.

Good luck!