• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech

EGR Valve help

  • Thread starter Thread starter stargate160
  • Start date Start date Jul 18, 2005
S

stargate160

New Member
Apr 15, 2005
40
0
0
Jul 18, 2005
#1
  • Jul 18, 2005
  • #1
Well I got a check engine light and it said that the EGR valve reported insufficient flow. Autozone said I needed a new EGR valve. I said okay and ordered it. I had a friend help me install it. We turned the battery off for about 5min and everything was fine. The check engine light went away. After driving for about 30min, it came back on. The code is the same thing. I'm confident it's installed correctly.

What else could be the problem?

Thanks for the help.
 
L

LCGimp

Founding Member
Jan 10, 2002
68
0
0
Oregon City, OR
Jul 19, 2005
#2
  • Jul 19, 2005
  • #2
Its probably the sensor that is bad, not the valve, mines gone bad twice now. Dealership has fixed it both times under warrenty without a problem.
 

ZincPony

Member
Jun 15, 2005
84
0
6
Jul 19, 2005
#3
  • Jul 19, 2005
  • #3
I had the same **** happend to me. The light came on when i was going to the shore. I though there was a problem with the Valve. Autozone told me the same ****. they had a EGR valve for like 54.99 but i didnt buy it. and they tried to sell me fuel injector cleaner. i tried the injector but it didnt work. i was gonna replace the EGR but there was that little voice in me saying check it out before replacing the thing. i got it serviced at a ford dealership. they charged 80 an hour to check the engine. I told them where tthe problem was, it took like 20min to get them to find whatever that was causing the problem. it was the the sensor that was bad. it took 150 total. Parts, labor and checking. i think i made out alright.
 

AndyG47

Member
Aug 20, 2004
0
0
16
Jersey
Jul 19, 2005
#4
  • Jul 19, 2005
  • #4
IS this the code you are getting?

P1408 EGR Flow Rate Out Of Range Insufficient Flow

You don't need an EGR Valve you need the DPFE Sensor.

CHECK THIS POST HERE and go to the #14 reply. That's what you need.
 

AndyG47

Member
Aug 20, 2004
0
0
16
Jersey
Jul 19, 2005
#5
  • Jul 19, 2005
  • #5
ZincPony said:
it took 150 total. Parts, labor and checking. i think i made out alright.
Click to expand...

no offense but you could've done it your self for a helluva lot cheaper.

the sensor is under $20 after tax and stuff. I think (don't remember it's been a few months)

disconnect battery.
unplug sensor.
use a pair if pliers (if needed) to CAREFULLY work the hoses lose.
disconnect hoses (don't get them mixed up) (mark them if needed)
attach hoses to new sensor
plug in
reattach battery

done.

ZincPony said:
Autozone told me the same ****
Click to expand...
Maybe Autozone should go out of business.


The only thing that saved me money was my friend takin' my car to the Morris County Vo-Tech garage (he was in the auto class) to have the code read (FREE). then talk to my uncle (owns garage) (FREE)then to one of the techs at the Ford dealer on Route 23.(FREE)

wow, i feel like an @$$ now. i'm leaving.
 
S

stargate160

New Member
Apr 15, 2005
40
0
0
Jul 19, 2005
#6
  • Jul 19, 2005
  • #6
Can I return the EGR valve to autozone for a refund since they told me to get the wrong part? They scanned the code free and the parts manager seemed fairly confident when he told me I needed to replace the EGR valve - so I took his word and bought the $50 part.

Also, is driving with the SES light because of this sensor malfunction effecting anything like my gas mileage or idle? Is this something I need to get fixed asap?

Thanks
 

AndyG47

Member
Aug 20, 2004
0
0
16
Jersey
Jul 19, 2005
#7
  • Jul 19, 2005
  • #7
stargate160 said:
Also, is driving with the SES light because of this sensor malfunction effecting anything like my gas mileage or idle? Is this something I need to get fixed asap?

Thanks
Click to expand...

I don't think so. Mine was on for a few weeks. it's more of an annoyance than anything else.
 
You must log in or register to reply here.

Similar threads

D
Question about EGR valve, replacement, and a part on the valve.
  • DPP
  • May 9, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
138
SN95 V6 Mustang Tech May 23, 2026
DPP
D
D
SN95 V6 1994 occasional rpm surge while driving---where should I start?
  • DPP
  • Aug 30, 2025
  • SN95 V6 Mustang Tech
Replies
4
Views
448
SN95 V6 Mustang Tech May 5, 2026
DPP
D
A
Help ID - Turbo GT, SVO differences
  • aldoelmalo
  • Jun 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
96
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 2, 2026
aldoelmalo
A
S
New misfire after replacing valve seals/springs.
  • SpeedofDarkness
  • Aug 24, 2025
  • SN95 V6 Mustang Tech
Replies
0
Views
210
SN95 V6 Mustang Tech Aug 24, 2025
SpeedofDarkness
S
T
Looking for some help with 2006
  • thedudeillest
  • Mar 16, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
14
Views
481
2005 - 2014 S-197 Mustang -General/Talk- Mar 20, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?