Lowered my car with Eibach Springs and new Tokico Struts, since then have been having problems with vibrations in front end. Front end is aligned and still problem persists.,. Could I need CC plates?
Lower about 1.25-1.5 and only experience the vibration at low speed. Have resurfaced rotors and checked all other suspension components, including front whell bearings.
When you swapped out the springs, did you put the bushings back on the sway bar? Tightened all the way? Dunno if that would cause the issue, but just pulling at strings here lol
CC plates would be a good idea even if you didn't do anything to your suspension. When you say vibration in the front end could you be a little more specific ? Is it comming from the drivers or passenger side ? Do you feel it in the pedal, through the steering wheel, floor boards or anywhere else ?