• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-

eibach drag springs

  • Thread starter Thread starter autumn_again
  • Start date Start date Jan 12, 2009

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 12, 2009
#1
  • Jan 12, 2009
  • #1
has anyone tried these?
thinking of picking them up. do they lower the car at all?
 

DarkFireGT

Playing with my wife's really makes me want one.
10 Year Member
May 23, 2004
692
10
89
East Moline, IL
Jan 13, 2009
#2
  • Jan 13, 2009
  • #2
Did they start making them for our cars? I hadn't seen them for our cars.

When I bought mine, I asked the guys what would be the best spring for a daily driver that will see the track frequently, and he said the Eibach Pro Kit. And I'm happy I took their recommendation. Between the springs and D-Specs, I get virtually no squat on launch.
 

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 13, 2009
#3
  • Jan 13, 2009
  • #3
i was thinking of when i go with some springs go with the d specs too. i want to be able to launch the car hard. how do you run your d specs at the track? loose as hell in the front and tight in the rear?

http://www.americanmuscle.com/eibach-drag-springs-2005-gt.html
 
B

blackgt460

Active Member
Jun 3, 2003
109
21
28
South East Pennsylvania
Jan 13, 2009
#4
  • Jan 13, 2009
  • #4
I may try those myself. I didn't know they made them for our years either...no they don't lower the car and on the fox style cars they seem to make the front sit a bit higher but I think our cars are heavy enough to where it would probably just look like stock ride height...good find
 

DarkFireGT

Playing with my wife's really makes me want one.
10 Year Member
May 23, 2004
692
10
89
East Moline, IL
Jan 13, 2009
#5
  • Jan 13, 2009
  • #5
Thanks for the link.

I run full hard in the rear and full soft up front. This is what my launch looks like. In this picture I'm lowered with 28" tires. Looks like it does sitting still, except for a bit of lift of front.
 

Attachments

  • 2621876215_82ae1ffd28_b.webp
    183.3 KB · Views: 105

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 13, 2009
#6
  • Jan 13, 2009
  • #6
thats a great picture. how high are you launching at?

i see mustang and fast fords got a tire up a few inches on their 12s or bust article. do you still have your front sway bar on?

are you running radials or slicks on the stockers?

and i didn't think they lowered at all, just wanted to make sure. does the air bag really help at all? i couldn't find any information on the reasoning behind it, i know a little on what it does, but i figured if it worked great why isn't there more information out there.

how does it inflate?
 

DarkFireGT

Playing with my wife's really makes me want one.
10 Year Member
May 23, 2004
692
10
89
East Moline, IL
Jan 13, 2009
#7
  • Jan 13, 2009
  • #7
Swaybar has been deleted and installed BMR lightweight radiator support. My suspension setup keeps the front end from popping up and the rear squatting. As you can see, the front comes up a bit, which helps with weight transfer. The front tires should come up until 10's, or low 11's, on a properly set up car. And even then, you can stop that. It looks cool, but you're loosing energy most of the time. A 12 second car, properly tuned, should not bring the front end up more than 3 inches or so. If it brings it up more, it's probably squatting, which is losing energy. Not lowered means that they were running the stock springs. Stock springs are crap for drag racing.

I'm running drag radials. I was running M&H 325/45/17 in that pic. That launch was at about 4k.

I'm not sure how that inflates. I would assume probably a hand pump or something. From the desciption, it sounds like it's the Pro Kit springs plus the bag. The bag is just to keep the rear end from sagging on launch, which wouldn't happen probably until 11's. It's not near the issue on our cars that it was on previous generations.
 

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 13, 2009
#8
  • Jan 13, 2009
  • #8
DarkFireGT said:
Swaybar has been deleted and installed BMR lightweight radiator support. My suspension setup keeps the front end from popping up and the rear squatting. As you can see, the front comes up a bit, which helps with weight transfer. The front tires should come up until 10's, or low 11's, on a properly set up car. And even then, you can stop that. It looks cool, but you're loosing energy most of the time. A 12 second car, properly tuned, should not bring the front end up more than 3 inches or so. If it brings it up more, it's probably squatting, which is losing energy. Not lowered means that they were running the stock springs. Stock springs are crap for drag racing.

I'm running drag radials. I was running M&H 325/45/17 in that pic. That launch was at about 4k.

I'm not sure how that inflates. I would assume probably a hand pump or something. From the desciption, it sounds like it's the Pro Kit springs plus the bag. The bag is just to keep the rear end from sagging on launch, which wouldn't happen probably until 11's. It's not near the issue on our cars that it was on previous generations.
Click to expand...


oh i know getting the front end up is hurting a little bit but i think it'd be cool to say that i lifted a tire off the ground.

yeah, i thought it was odd it only came with one bag for the pass rear, alot of the kits i see with bigs are one for both the back ones.
 

Steel Horse

Member
Oct 28, 2008
0
0
16
Altoona, IA
Jan 14, 2009
#9
  • Jan 14, 2009
  • #9
DarkFireGT said:
Thanks for the link.

I run full hard in the rear and full soft up front. This is what my launch looks like. In this picture I'm lowered with 28" tires. Looks like it does sitting still, except for a bit of lift of front.
Click to expand...

No HDR on this one? lol. How well do the 325s fit in the wheel wells?
 

Attachments

  • 2621876215_82ae1ffd28_b.webp
    183.3 KB · Views: 159

DarkFireGT

Playing with my wife's really makes me want one.
10 Year Member
May 23, 2004
692
10
89
East Moline, IL
Jan 14, 2009
#10
  • Jan 14, 2009
  • #10
autumn_again said:
oh i know getting the front end up is hurting a little bit but i think it'd be cool to say that i lifted a tire off the ground.

yeah, i thought it was odd it only came with one bag for the pass rear, alot of the kits i see with bigs are one for both the back ones.
Click to expand...
Mustangs tend to squat more on the passenger side, thus the reason for the one bag. If you look at pictures of SN95s and Foxes pulling the wheels, you'll usually notice the passenger side is squatting more.

Steel Horse said:
No HDR on this one? lol. How well do the 325s fit in the wheel wells?
Click to expand...
Nope, no HDR. That was point and shoot taken by my wife. Not to mention it's nearly impossible to get a true HDR with an object moving that fast.

They fit great. At stock height, there's still quite a bit of room. With 1-1.5" lowered, there's still an inch or so, and with the right wheels, they'll tuck if you hit a bump. It was very nice of Ford to roll our fenders from the factory. Just make sure that if you're lowered, you have an adjustable panhard bar to get the rear end centered.

this is right after I lowered it, so the springs hadn't settled yet.
 

Attachments

  • 2304841565_42a422cdcf_b.webp
    342.2 KB · Views: 156

NastyStang113

New Member
Sep 12, 2008
1,567
1
0
Florida
Jan 14, 2009
#11
  • Jan 14, 2009
  • #11
Did your springs really settle?
 

Steel Horse

Member
Oct 28, 2008
0
0
16
Altoona, IA
Jan 14, 2009
#12
  • Jan 14, 2009
  • #12
NastyStang113 said:
Did your springs really settle?
Click to expand...

Based on the gaps between the tires and the fender on that pic and the gaps on the pic in his sig I'd say so.
 

DarkFireGT

Playing with my wife's really makes me want one.
10 Year Member
May 23, 2004
692
10
89
East Moline, IL
Jan 14, 2009
#13
  • Jan 14, 2009
  • #13
Yes, the springs definitely settled. That picture was 10 minutes after installation.

The rears on the image above are about the same height as this one. These images were a couple of months apart. I wish I had a better "right after" and "after settling", but after lowering and getting new wheels, I put drag radials (shorter than stock) on my stock wheels, so it wouldn't be a fair comparison. The initial lowering lowered it about an inch. It settled another half inch or so, to the advertised 1.5". Also, the front tires are wider, but the same diameter as stock, and you can see the difference there as well.

 

Attachments

  • 2645087892_386849e97f_b.webp
    226.8 KB · Views: 140

NastyStang113

New Member
Sep 12, 2008
1,567
1
0
Florida
Jan 14, 2009
#14
  • Jan 14, 2009
  • #14
Most springs are already settled now-a-days. Not calling you a liar by any means though.
 

DarkFireGT

Playing with my wife's really makes me want one.
10 Year Member
May 23, 2004
692
10
89
East Moline, IL
Jan 14, 2009
#15
  • Jan 14, 2009
  • #15
They're not like they used to be, but they definitely do settle. I've seen many people mention it, and obviously, I've seen it happen on my own car.
 

NastyStang113

New Member
Sep 12, 2008
1,567
1
0
Florida
Jan 14, 2009
#16
  • Jan 14, 2009
  • #16
I guess I've been lucky. All six cars that I helped lower didn't settle. I guess it's just luck of the draw.
 

DarkFireGT

Playing with my wife's really makes me want one.
10 Year Member
May 23, 2004
692
10
89
East Moline, IL
Jan 14, 2009
#17
  • Jan 14, 2009
  • #17
I wanted it to settle. It wasn't the advertised drop upon initial installation. Having seen other's Pro Kits, I knew it would drop.

The Roush springs I put in the '05 did not.
 

NastyStang113

New Member
Sep 12, 2008
1,567
1
0
Florida
Jan 14, 2009
#18
  • Jan 14, 2009
  • #18
I wonder what the reason behind it. I've heard the BMR springs settle quite a bit, too. I know Steedas don't or at least the ones I've seen.
 
You must log in or register to reply here.

Similar threads

Ebay Lowering springs
  • Canyonred86
  • Aug 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
298
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 9, 2026
Qtrhrse23
D
Brake & Suspension Rebuild
  • DuluthFoxbody
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
430
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 8:51 AM
Rdub6
Front Coil Overs and Rear Traditional Springs within a Maximum Motorsports K-Member Kit
  • Habu135
  • Sep 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 9, 2026
Habu135
Suspension Harsh Ride
  • PonyGTrider
  • Mar 20, 2026
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
62
Views
3K
Fox 5.0 Mustang Tech Apr 11, 2026
Noobz347
C
Suspension Rear suspension help
  • Clark302
  • Aug 17, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
459
Fox 5.0 Mustang Tech Aug 17, 2025
Clark302
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?