eibach springs for a 87 5.0 gt hatch

oldno7 · Mar 27, 2010

i just picked up these springs for my 87 5.0 and in stalled the back it dont liik like it sits right so i think they are the wrong ones i got the pro kit and these are the numbers on them 250571-3514.202thats on one and the other is 239445-3510.301 please help.

oldno7 · Mar 27, 2010

i just picked up these springs for my 87 5.0 and in stalled the back it dont liik like it sits right so i think they are the wrong ones i got the pro kit and these are the numbers on them 250571-3514.202thats on one and the other is 239445-3510.301 please help.

MustangLX-5.0 · Mar 27, 2010

3510.301 are the front springs, 3514.202 are the backs. did you install with the pigtails on the lower side of the perch facing the driveshaft? And let me guess, the drivers side rear is a little lower than the pass side?

rbonella · Mar 27, 2010

pics would help because I dont know what "doesn't sit right" means to you?

I do not buy Eibach springs anymore!!!!!!!!!

oldno7 · Mar 27, 2010

MustangLX-5.0 said:
3510.301 are the front springs, 3514.202 are the backs. did you install with the pigtails on the lower side of the perch facing the driveshaft? And let me guess, the drivers side rear is a little lower than the pass side?

heres a pic of driver side http://www.flickr.com/photos/48771431@N03/4467237986/ and this is the pass http://www.flickr.com/photos/48771431@N03/4467226826/ hope that help

oldno7 · Mar 27, 2010

how do you get the pics in post?

oldno7 · Mar 27, 2010

DRIVER SIDE Photo0613 on Flickr - Photo Sharing!
pass side Photo0614 on Flickr - Photo Sharing!

oldno7 · Mar 27, 2010

i have 2 posts of the same how do i link them together

wythors · Mar 27, 2010

Well to start with, you need new lower isolators BAD.

oldno7 · Mar 27, 2010

I know when i bought the springs i got the pads too. When i got it i noticed they sent 2 fronts i called them and told them what happend and i will be getting them monday. I just had to see what it looked like.

I think i have to turn the springs some.

MustangLX-5.0 · Mar 27, 2010

Yeah, it looks like one isolator is missing and theres only like 1/4 of the other isolator left. You NEED them otherwise it WONT sit right. Second, the spring on the passenger side needs to be rotated CC about 45 degrees. That pigtail should be lined up parallel with the axle pointing towards the driveshaft. That right there can change the ride height on one side by up to a half inch. The drivers side, it's not the same as mine. Look at my sig... I have the complete set. My back springs are coiled the oppositte from each other. Yours are coild in exactly the same direction and I dont know why. Your D side pigtail is pointing toward the outside of the car, when it should be the other way, IF its the same pro springs, othewise, something isnt right. Those part numbers, you installed both the front and back, right? And both back springs have the same number on them, right?

oldno7 · Mar 29, 2010

Photo0615 on Flickr - Photo Sharing!
here is the driver side now
Is that right

tannerc91gt · Mar 29, 2010

ive got a picture of pro-kit springs on my car in the ling in my sig, i never had any issues with them, but i guess i didnt make the install any more complicated that it needed to be

oldno7 · Mar 30, 2010

I was just checking if the pig tails where right, thats all. It was easy though.

eibach springs for a 87 5.0 gt hatch

oldno7

Member

oldno7

Member

MustangLX-5.0

rbonella

Member

oldno7

Member

oldno7

Member

oldno7

Member

oldno7

Member

wythors

Get off my lawn!!!

oldno7

Member

MustangLX-5.0

oldno7

Member

tannerc91gt

This last 25% is foreign territory at this point

oldno7

Member

Similar threads

eibach springs for a 87 5.0 gt hatch

Member

Member

Member

Member

Member

Member

Member

Get off my lawn!!!

Member

Member

This last 25% is foreign territory at this point

Member

Similar threads

Privacy & Transparency

Privacy & Transparency