eibach........................................

[jrc_03_gt]

I want to see some pictures of 99 & up stangs with the eibach pro-kit springs. Also state your tire size and weather or not you had to use caster camber plates. Help me out . :SNSign: :SNSign:

 

[BooWFO]

No CC's were needed on mine. I run stock rims and tires most the time. After page 2 almost all the pages have her sitting on the pro's
http://www.gotstang.com/profile.php?BooWFO&detail=1&page=2#jump

View attachment 497707
View attachment 497708

 

[Jinx]

Photo taken just after installation. Factory tires and rims. No C/C plates required.

 

[trailblazr81]

Stuck at work, sorry no pic. I got caster/camber plates with mine because I wanted to adjust everything for better handling. Stock Mustangs cant adjust caster, I wanted to for better turning. I want to do a little club track stuff and auto-x next year so it was a must for me. But if your just wanting to lower it and upgrade your springs you should be fine. Oh wait I'm not thinking here... I have the Sportlines, no wonder those other cars looked higher than mine.

 

[BlueRuckus]

I have Eibach Pro Kit on stock Bullets. Tire sizes in my sig.
Very happy with the springs. Much smoother then I thought.

http://forums.stangnet.com/showthread.php?t=580843

Oh, yeah. forgot to mention. Did not need CC plates.

 

[flipnsac]

Eibach Pro kit, MAC CC Plates, See sig for tire/wheel sizes

 

[BennyBlown2v]

245/45/17 GS-D3's, Pro-Kit Springs.

I later took out the front isolators to drop it a tiny bit more. Ride height was 26.5" from the ground to the inside of the fender above the tire. I had to use caster/camber plates, but they are amazing anyway, increase steering response and feel tons (spherical bearings in my MM 4bolt plates and the added caster I dialed in help there).

 

[jrc_03_gt]

thanks guys:SNSign: