I drove my car for 15 minutes after they dyno tuned. When I hit down town traffic the tem. got real high around 250. I have an electic fan that cost me around 60 dollars. i was hoping that this fan would make the job, but i was wrong. I already have the aluminum radiator, what kind of fan should i put in my car since i have the SC and the space is very limited, any suggestions. thanks...
Electic fan suggestions!!!!
- Thread starter rflow50
- Start date
txstang84
15 Year Member
dude, did you not read my replies in your other thread? the black magic is a great fan-i've got one, it works like a champ, and I've also heard that a MKVIII fan works pretty well too
393Bird
Founding Member
Best choices are Ramcharger or a fan from a Mark VIII. With your SC belt taking up some of the space, the Ramcharger may be the best choice. Do not even consider anything with less than 3,000 CFM of air flow. The Mark VIII move 4000-4500 CFM.
I am using a Mark on on mine, and even with the 4000 RPM stall I had, I never saw more than 185f water temp.
http://members.tccoa.com/392bird/birdwork6.htm
I am using a Mark on on mine, and even with the 4000 RPM stall I had, I never saw more than 185f water temp.
http://members.tccoa.com/392bird/birdwork6.htm
1EVIL88VERT
New Member
i have the knock-off of the black magic fan (proform) and i can sit it trafic for hours with the temp never rising above 185 and this is on 105 deg. days, it works great for me and is nice and compact.
I'm using a junkyard ford taurus 3.8 electric fan with a dcc controler on my S-Trim supercharged 347 Stroker. It's cool to hear it still run after I shut off my car. Either a Ramcharger, Used Mark VIII or Taurus/Sable 3.8 fan will do with a supercharger. But spend your money on the DCC controler and you'll never look back!!
TC93
Well-Known Member
Check out these fans... http://www.corral.net/forums/showthread.php?t=696319
The one in the pics is a buddies car we put it on. It is a blown 347.
But before getting a new fan, test the old one 1st and check for a colasping lower rad hose...
The one in the pics is a buddies car we put it on. It is a blown 347.
But before getting a new fan, test the old one 1st and check for a colasping lower rad hose...
larrendeuce
Member
Flex a lite has a new fan that flows 3,300 cfm the extreme something or other. I'm planning to get one.
TC93
Well-Known Member
rflow50 said:
Last time I talked to him he said he had abotu 4 or 5 left. PM him on Corral...
I am in the middle of adding one to another blown 347. Right now it has a Black Majic and it can't keep up, while in cruisin. The shroud on the fans in the pics cover 95-99% of the rad fins. The one I am currently workin on is going onto an AFCO rad and covers all the fins and had to be trimmed. Even goes over on tank a little. Can get pics if you like... If so e-mail me and I will send you some.
i would try to see if i can contact the guy in the corral forums today, if not, i am going to the j/y tommorrow morning and i would try to see if i can find the Mark VIII or the taurus 3.8 fan. Do i need to buy the DCC controller if i am installing one of the two. thanks. I have an AFCo rad. too, can you post any pics.
393Bird
Founding Member
Here is the Mark VIII fan I mounted to a Summit radiator.
Here is my Mark VIII install information.
http://members.tccoa.com/392bird/markviii.htm
Here is my Mark VIII install information.
http://members.tccoa.com/392bird/markviii.htm
Attachments
