• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Electric fan Help!!

  • Thread starter Thread starter ninety15.0
  • Start date Start date Jun 11, 2006

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Jun 11, 2006
#1
  • Jun 11, 2006
  • #1
Hey guys...well im down in SC for the summer and its starting to get HOT down here. My AM temp gauge saw just about 225 today sitting in traffic at 95 degrees and it had a hard time cooling it off after that. I have a stock rad. w/ a flex fan. I was thinkin of upgrading the radiator to a nice aluminum one or upgrading to an Electric fan or both...just not right now. I have heard real good things about the mark Viii fans and i have found some on Ebay for like 80 bucks. I have a couple questions about the install and setup though. How does the mark Viii fan mount up on the mustang? Do you need to run a dcc controller? Which would be more effective to change out the radiator or the fan? Also, more power is always nice...so did anyone actually feel a difference after an electric fan swap? thanks guys
-Nick
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 11, 2006
#2
  • Jun 11, 2006
  • #2
your flex fan actually cools better then a electric one. I would upgrade the rad to a 3 core aluminium piece. I bought the ford racing 3 core and i like it. the fact that you have a flex lite regular fan is probably the reason you have not seen your car overheat yet.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 11, 2006
#3
  • Jun 11, 2006
  • #3
Nick, Once you are moving at decent speed (40 MPH+) does the car cool back down pretty quick? If not, a radiator might be helpful (the system isnt rejecting enough heat no matter how much air moves through the radiator). If it only runs a little hot while going slow or stopped, it's more of a fan issue (since with sufficient air, the system can reject enough heat).

I think Steve (Srothfuss) did a write-up on installing a Mark 8 fan and Dc Controller - if he did, it will be a good resource.

I would use the Dc Controller - it's a great unit, esp for the draw of that big fan.
Once you price a 75 amp relay, controller, etc, there's not a huge difference in price (to jump to the DC Controller).

My random thoughts. Good luck.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 11, 2006
#4
  • Jun 11, 2006
  • #4
If you have underdrive pulleys, get rid of them.

Electric fans are better than any mechanical fan. They pull more air at low speeds and shut off at highway speeds when there is enough airflow to keep thing cool.

If you switch to an electric fan, a 3G alternator upgrade is a must. Here's why:

Electric fan = 3G alternator if you want long life & reliability from your car.
The electric fan saves some HP. The stock fan's parasitic drag runs from 5-12 HP depending on who you talk to. The electric fan uses about 1/2 HP of power from the electrical system.

Figure this:
Ignition system & computer = 12 amps
Fuel pump = 12 amps
Exterior lights = 15 amps
Fan (heater or A/C) = 15 amps (can run between 5-25 amps depending on setting)
Radio & instruments = 10 amps
Wipers = 10 amps

That's grand total of 74 amps from a 65 amp alternator. Talk about overdrawn at the bank!

The DCControl fan controller ( WWW.DCControl.com ) is simply the best way to control the fan. If you have one, sometimes you can get away with using the stock alternator if your car is a daylight only cruser or strip only race car. The DCControl unit uses a temp sensor to tell the controller how warm the engine is. The controller only pulls enough electrical current to keep the fan runnning so that it pulls enough air to keep the coolant temp where you set it.

Aluminum raditators are very good, but also very expensive unless you find an Ebay special. A 3 core copper/brass radiator from Autozone is available for $180: it is a GDI 433138.

Want to know more?
See http://www.geocities.com/smithmonte/Auto/MarkVIII_Fan.htm
or http://www.qsl.net/wd4ngb/markviii.htm
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Jun 11, 2006
#5
  • Jun 11, 2006
  • #5
thanks for all the info guys...its very helpful. Hissin...my car has a very hard time cooling the car back off after i get up to speed...thats what had me concerned more than anything. I do have UD pullies but i have a new water pump and new hoses and t-stat. It seems like the car should cool of fairly quickly once up to speed. But after sitting in traffic for about 15 minutes the temp was up to about 220-222* and by the time i got home after cruising at 50...the temp had only dropped down to about 215-218. what are your feelings about the flex fan? maybe with the flex fan and a new alum rad. i may be able to get these temps under control. I have seen some good deals on ebay for fully TIGed AL rads for around $225...again thanks for the help....180* t-stat by the way
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Jun 11, 2006
#6
  • Jun 11, 2006
  • #6
i have a 3G alt upgrade already so im not to worried bout the current draw of the elec. fan....thanks for the great explaination though!
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 11, 2006
#7
  • Jun 11, 2006
  • #7
One other thing I forgot earlier - you have the little air dam under the car, right? A weak fan and the lack of that can cause hot running in all conditions.

I've never run a flex fan so I cant comment (I run a metal FAL blade and HD clutch on the 88, and SN95 fan that's Dc Controlled on the '94).

Your temps are a bit hot for your stat IMHO (decent stat? Mr Gasket is my choice because it's balanced. Decent gauge? I had to ask).

Addressing the radiator could be worthwhile if yours has been around for a bit. It's also worth mentioning that water transfers about 2.6 times as much heat as E/G coolant, and each PSI in the system = ~3*F higher boiling point. These things add up.

My random thoughts.

Good luck.
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Jun 11, 2006
#8
  • Jun 11, 2006
  • #8
thanks for the info....I'll let you know a little more bout my set up. Currently i do not have the air dam under the car....and i know thats an issue...but i dont have any temp problems on the highway. The fan i am running is a water pump driven metal blade fan. I thought they were called "Flex" fans?? The water temp gauge is an electrical autometer ultralite...brand new. I am probly running about a 60/40 coolant/water mix right now b/c i really live up north...but i will try to swap that ratio around for the summer in SC. I believe the t-stat is just an autozone piece. next weekend i will change the ratio to 60/40 water/coolant and add some water wetter after swapping the t-stat out for a mr gasket piece and see if that helps. If that doesnt work then i will prolly spring for an AL rad. Where can i get another air dam? thanks for the help man i appreciate it!
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 11, 2006
#9
  • Jun 11, 2006
  • #9
I think you can get the air dam at LRS or the dealer (I got one for the '94 from the dealer for 12 bucks. Not the same part, but it gives an idea that it *might* not be a rip off to get it there).


Seems to me that flex fans have variable pitched blades - as the motor speeds up, the pitch lessens to lessen resistance. They work well for some folks but because I live in the desert, I dont like them (too many cars here run too hot because of them). A mechanical fan pulling serious air and being parasitic go hand-in-hand. Not that yours is an issue - just MHO.

A loose tidbit is that it's said that for every percent of antifreeze that's removed from the system (displaced by water), temps drop that same percent. It's a horrible way of saying it, but it is somewhat accurate (between 25-75% coolant ratios). Coolant just doesnt transfer heat and it really doesnt raise the boiling point at all (I TOTALLY see why you ran the stoichiometry the way you have it for cold winters though). I went from a parts store 180* stat to a Mr. G 180 within one week and the latter dropped mean operating temps by about 8*F (because it opened when it was supposed to, not 5-10* late).


Your plans sound really good. I find that on cooling systems, a lot of little things add up.
Good luck!
 
You must log in or register to reply here.

Similar threads

Electrical Lincoln Mark VIII Replacement Fan Motor
  • AeroCoupe
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
173
Fox 5.0 Mustang Tech Sep 26, 2026
AeroCoupe
Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Resolved Got Too Hot!!!
  • PonyGTrider
  • Apr 27, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
768
Fox 5.0 Mustang Tech May 6, 2025
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?