• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-

Electric Fan Vs Clutch Fan Vs Flex Fan On A 68

  • Thread starter Thread starter MustangMando
  • Start date Start date Sep 10, 2013

MustangMando

Member
Jul 16, 2011
107
0
17
Sep 10, 2013
#1
  • Sep 10, 2013
  • #1
I have a 68 mustang with a 302/t5 that needs cooling, i have a alluninum two row radiator and a 75 amp alternator. Need advise on best option, this car is a cruiser not racer. I live in houston so it gets hot.


Thanks
 

valley82

Member
May 16, 2005
204
2
19
San Diega, Ca.
Sep 10, 2013
#2
  • Sep 10, 2013
  • #2
I am not familiar with the 68 stangs, but I have a ford racing 340hp 302ci motor in my 66 and have a three row aluminum radiator and a 16" maradyne electric fan. It has never even thought about overheating even in stop and go traffic and the ac on. I live inland in San Diego 100+ degrees F. In the summer time.
 

Boogie's AutoRama

New Member
Jun 23, 2013
14
0
2
Sep 11, 2013
#3
  • Sep 11, 2013
  • #3
I have a V-8 in my '66 with an electric fan.
Never over heats. I'm just down the road from you in Louisiana, gets hot here too.

The 75A alt should be enough to run a fan. But if you also have A/C I would think about getting a higher amp one.
I'm running a 100A alt out of a '80-'90's Lincoln Town car. Never had a problem with a dead battery.

One of the great side effects of an electric fan (besides losing the parasitic hp drain) is how quiet they are compared the the water pump mounted fans.
 

rbohm

Founding Member
Apr 12, 2002
6,698
550
204
tucson,az
Sep 11, 2013
#4
  • Sep 11, 2013
  • #4
my experience with clutch fans is somewhat abysmal as they all tend to fail more often than a flex fan or an electric fan. the flex fans tend to be very loud though, but at least are reliable. the electric fan is the way to go, they are quiet, reliable, and easy enough to install.
 

MustangMando

Member
Jul 16, 2011
107
0
17
Sep 11, 2013
#5
  • Sep 11, 2013
  • #5
What is a good electric fan that not to pricey? Do i need a shroud?
 

MustangMando

Member
Jul 16, 2011
107
0
17
Sep 11, 2013
#6
  • Sep 11, 2013
  • #6
I have 4 1/4 clearance from radiator to my pulley
 

valley82

Member
May 16, 2005
204
2
19
San Diega, Ca.
Sep 11, 2013
#7
  • Sep 11, 2013
  • #7
View attachment 124767
ZFB16S16" ZIRGO 3000cfm High Performance BLU Cooling FanWith a length of 16 inches, a height of 16.7 inches, and a depth of only 3.5 inches$119.99/ea
0 1 2 3 4 5 6 7 8 9 10
This one has the same specs as the one I run and will fit your 4 1/2" between radiator and pulley.
http://mustangdepot.com/OnLineCatalog/Cooling/electric_fans_al.htm
 

iskwezm

10 Year Member
May 24, 2005
4,159
20
79
Rowland Heights,California
Sep 12, 2013
#8
  • Sep 12, 2013
  • #8
Derale or Spal make good fans. It has been tested that Zirgo fans are overated.

If you have room, a junkyard Taurus(or Mark VIII) fan is the best for a cheap alternative. My car rarely sees over 178* on the hottest days in traffic.
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Sep 15, 2013
#9
  • Sep 15, 2013
  • #9
im gonna try the dual contour fan..the mark viii and taurus fan were way too thick to fit in my 66, even with heavy trimming...

fyi I currently have a mechanical stock fan with fan shroud. 340 hp and a good aluminum two row radiator and it never overheats, even in 100+ cali weather

Sent from my SPH-L710 using Tapatalk 4
 

MustangMando

Member
Jul 16, 2011
107
0
17
Oct 7, 2013
#10
  • Oct 7, 2013
  • #10
I bought a spal and finally connected it right, i am really pleased with it thanks guys. A little loud but so what, just turn up the radio.

 
J

JohnnyP123

New Member
Feb 9, 2014
6
0
2
Feb 10, 2014
#11
  • Feb 10, 2014
  • #11
MustangMando said:
I have 4 1/4 clearance from radiator to my pulley
Click to expand...
Hey Mando,
Warning! big problem with regular fans that people are mentioning. You pointed out you have a 65amp alt. None of those fans will work and they will fry your alternator. I know you said cheap, but sometimes cheap is more expensive. Take a look at the brushless fan from Delta PAG it only burns 16amps and pulls the most air of all the other fans. check them out at deltapag.com
 
You must log in or register to reply here.

Similar threads

S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
796
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
D
Engine Is the oem clutch fan always supposed to be running?
  • dqureshi06
  • Sep 13, 2024
  • Fox 5.0 Mustang Tech
Replies
2
Views
266
Fox 5.0 Mustang Tech Sep 13, 2024
Mustang5L5
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
121
The Welcome Wagon Jul 3, 2026
5150K
5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?