hello i am thinking of switching my fan from the 95 to the 89 and putting 2 other stock fans from something else on the 95. i need to cool down my .060 over 302 89 car and make it look good. i am not concerned in any way about the 95 and i will put a mechanical fan on it if i have to. i know if i take off the fan temp sensor plug i will get a code. what if i just cross the 2 wires on that connector, will i get a code. i may just keep the stock fan harness in the 95 and hook the fans up to it while i just make my own harness for the sn95 fan to put on the 89. i just want to know if this will work.