I am trying to put in my electric water pump. It is a proform wp and the part # is 68220BK. It says to prevent failure of the motor, use a fuseable link (10-30amp). Most of the people from summit were telling me to run a 30 amp relay that I can get from a place like napa and run it like that. I know nothig about electircal but it just a water pump so I think I can do it myself. As long as it is a 30 amp relay, is there any way I can get the wrong one. I am trying to save myself trips to napa. Also, any help with the install as far as the wiring would help. thank you