• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

electrical problum

  • Thread starter Thread starter FSTMN
  • Start date Start date Jan 3, 2006
F

FSTMN

New Member
Dec 22, 2004
12
0
0
Jan 3, 2006
#1
  • Jan 3, 2006
  • #1
Hello hope everyone had a good holiday.I did a search and could'nt find an answer,so heres the problum I went outside on Sunday nite turned on the lights and everthing works exept the drivers side head light and the bright light indicater is lit up on the gauge cluster so barrowed the wifes car went and got a new bulb and it still won't work.Also the turning signals both work fine untill I turn the lights on then the drivers side won't blink it just stays on .A guy at auto zone said my multi function switch could be going out but from my experiance switches don't start to go bad they just go.I've tried all the wires at the headlamp all the wires at headlight switch ignition switch and the multi function thery are all tight.I simply don't know what to do any help would be greatly appriciated thanks.
 

bgjohnson

Founding Member
Sep 1, 2002
963
0
16
johnston,iowa
Jan 4, 2006
#2
  • Jan 4, 2006
  • #2
well the ole foxbodys had headlight swithc problems, they overheated real bad and sometimes caused a fire when the fog lamp switch was on also. I'd look at the headlamp and multifunction switch. Also unplug the connectors and look for melted connectors pieces inside.
 
W

wazazzle

New Member
Mar 30, 2005
618
1
0
In the dumpster behind McDonalds. WA
Jan 4, 2006
#3
  • Jan 4, 2006
  • #3
i'd have to agree. those little bulbs in the switches get really hot and melt the plastic. when i replace mine the switch housing was halfway melted and so were the connectors and wires.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jan 4, 2006
#4
  • Jan 4, 2006
  • #4
If only one side is affected, look for a problem in the wiring for that side.

Check the ground, since there is a separate ground for each headlight. The ground wire bolts down to the top of the radiator support above the headlight assembly. I had a similar problem and found that the driver's side ground wire had broken at the lug where it bolts to the chassis.
 
F

FSTMN

New Member
Dec 22, 2004
12
0
0
Jan 4, 2006
#5
  • Jan 4, 2006
  • #5
Thank you all very much for the replys I'll get out there today and try all that stuff.
 
F

FSTMN

New Member
Dec 22, 2004
12
0
0
Jan 4, 2006
#6
  • Jan 4, 2006
  • #6
Hey i just went outside and sure enough the grond wire is broken off at radiator.Thanks again for the suggestions I've never had a car that more things shake loose and just break off of drives me crazy sometimes.
 
You must log in or register to reply here.

Similar threads

2
Resolved Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
494
1996 - 2004 SN95 Mustang -General/Talk- Sep 4, 2026
2000ElectricGreen
2
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
189
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
847
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
P
Electrical 1988 GT Wrong Cluster- causing electrical issues?
  • pindude80
  • May 6, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
446
Fox 5.0 Mustang Tech May 6, 2025
pindude80
P
J
No Spark from Coil to Distributor
  • Jlr202729
  • Mar 25, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 26, 2024
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?