emblem and trim removal?

[hotrodredneck]

Well we got new quarter panel trim, and all the badges for the car to freshen her up. I just want to know if there is any special tips or tricks to getting the old stuff off, and where are the nuts for the quarterpanel trim?..are they inside the car? this is on the 65 BTW

 

[bnickel]

i'm not all that familiar with the 65-66 cars but the quarter panel trim nuts are inside the car, you'll have to remove the interior 1/4's to get at them that much i do know. also i suggest using the new barrel nut clips that come with the emblems and such rather than trying to re-use the old stuff.

 

[hotrodredneck]

yeah, planned on using the new hardware...thanks for the info

 

[xoxbxfx]

quarterpanel trim uses a standard 3/8" socket I believe...pretty straight forward... what other emblems?

 

[hotrodredneck]

we got the whole set. The pony's on the side, 289 badges, mustang emblems for the fenders, and the hood

 

[krash kendall]

i'm not all that familiar with the 65-66 cars but the quarter panel trim nuts are inside the car, you'll have to remove the interior 1/4's to get at them that much i do know.

Yeah, you will have to pull the back seat out, window cranks, vinyl door seal trim (the sill plates may need to come off to facilitate this) to get the interior quarter out.

 

[hotrodredneck]

that's a lot of work for 6 (in total) little nuts....but at least it will be worth the effort.