Engine Bay Cleaning.

droptopsnake01 · Jun 27, 2004

Hey guys my car will be in a car show for its first time on July 4th, and I was wondering what can I use to clean my engine bay, its not dirty or anything but I just want it to shine. I've heard of simple green? But is it bad to just spray water all in you engine bay? Also anything else I need to know about car shows? Any advice? Thanks guys.

cold96snake · Jun 27, 2004

Simple green just cleans. Try Bike Brite to make it shine a little, especially chrome. I cover my air filter and thats it. But as soon as your done, start it up and close the hood (to trap the heat) so that it dries out. No pressure washing (it forces water where it shouldn't go.)

98svtconvert · Jun 28, 2004

do not spray your alternater or any electrical components directly. they will get wet from the splashing. thats o.k. just start the car so it can dry like the above post said. back to black works great on the engine bay. good luck, hope you win.

missouri_guy197 · Jun 28, 2004

Simple green to clean it...Spray the engine with water, then spray on the simple green and let it set for about 10-15 minutes before you spray it off...then try some of the spray on tire foam on all the black plastic parts...it does wonders...

mustangrmyk · Jun 28, 2004

What is Bike Brite? Is it Harley shop stuff?

cold96snake · Jun 28, 2004

Yeah, it's just another cleaner/degreaser but reduces water spots and leaves a better shine IMO. And it's all right for plastic/rubber/painted trim/hoses parts.

chuckystang · Jul 27, 2004

Just to advise anyone with a 99 or newer cobra, they have coil on plug distributorless ignition and that means no water under the hood! I did not pressure wash it and just using the hose under there caused my spark plugs to get too wet and the performance of my engine went way down untill I took it in and had them all dried out and about 2 weeks later it was finally driving right. So to all of you who want to clean your engine, make sure absolutely nothing electrical gets wet! Its much easier to clean the older engines because of the distributer cap that protects them from the water. If anyone has any tips for blocking off stuff that you dont want to get wet, shooot em my way

doogz · Jul 28, 2004

Plastic bags around the stuff that doesn't look like it should get wet

Double bag it for protection.

chuckystang · Jul 29, 2004

hahahaa i like it

Engine Bay Cleaning.

droptopsnake01

New Member

cold96snake

98svtconvert

New Member

missouri_guy197

New Member

mustangrmyk

Member

cold96snake

chuckystang

New Member

doogz

chuckystang

New Member

Similar threads

Engine Bay Cleaning.

New Member

New Member

New Member

Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency