Hi
Had to move the car, it was next to my sons garage and there was a chunk of ice above it. Wanted to redo the engine compartment so my sons and I tackled it!!
Here is a photo after about 6 hours of work and beer drinking. Degreaser and prep. applied then wires covered with aluminum foil and started taping.
Next night continued masking and aluminum foil, , scuffed up the paint.
Today, Sat. morning prettied up the hole around the power pipe a couple hours of work, blew off the compartment walls with compressed air. More degreaser and paint prep, plastic over car and engine compartment cut out and masked off.
Then we sprayed. The camera phone doesn't do it justice...
View attachment 229384
View attachment 229385
Tomorrow I will take off the tape and foil, and get some better photo's. I thing I found out was you can get your color mixed and put in a spray can!! Didn't know that. $20 for a 16oz can.... expensive but worth it to me. Took about a can and a half.
PS the engine builder starts assembly next week... Why is the engine out??
Steve
Had to move the car, it was next to my sons garage and there was a chunk of ice above it. Wanted to redo the engine compartment so my sons and I tackled it!!
Here is a photo after about 6 hours of work and beer drinking. Degreaser and prep. applied then wires covered with aluminum foil and started taping.
Next night continued masking and aluminum foil, , scuffed up the paint.
Today, Sat. morning prettied up the hole around the power pipe a couple hours of work, blew off the compartment walls with compressed air. More degreaser and paint prep, plastic over car and engine compartment cut out and masked off.
Then we sprayed. The camera phone doesn't do it justice...
View attachment 229384
View attachment 229385
Tomorrow I will take off the tape and foil, and get some better photo's. I thing I found out was you can get your color mixed and put in a spray can!! Didn't know that. $20 for a 16oz can.... expensive but worth it to me. Took about a can and a half.
PS the engine builder starts assembly next week...
Steve