• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Engine Harness Connectors

  • Thread starter Thread starter 93 LX
  • Start date Start date May 12, 2007

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
May 12, 2007
#1
  • May 12, 2007
  • #1
Ok without buying a new harness I would like to replace the broken connectors with new ones. Its got that problem where the "ears" are broken off which leaves them with a chance to come off while driving.

thanks
Allen
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 12, 2007
#2
  • May 12, 2007
  • #2
Resto houses or FFI might be your best bet for something cost effective.

Good luck.
 

tbovee

Member
May 22, 2006
129
0
17
Fredericksburg Va
May 13, 2007
#3
  • May 13, 2007
  • #3
These should be whatyou are looking for???

http://rjminjectiontech.com/?p=10
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
May 13, 2007
#4
  • May 13, 2007
  • #4
there are some connectors but i was looking more for a kit with just connectors not pigtails...

Thanks

Allen
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
May 13, 2007
#5
  • May 13, 2007
  • #5
Don’t cut the existing connectors off and solder the pigtails on. If you are very clever, you will find that the connectors come apart so that you can remove the pins. A very small screwdriver releases the lock in the front of the center insert, while another small screwdriver inserted in the back pushes it out. Once the center insert is out of the connector shell, the pins come out easily by pulling on the wire from the rear. Some connector shells will add an extra lock for each pin that is released from the front side.

New pins are available from AutoZone in a $5 electrical pin kit for Fords. Other auto parts stores will carry the pins if they carry the Standard Motor Products line of parts.
 
You must log in or register to reply here.

Similar threads

Electrical/engine bay harness questions
  • djj62478
  • May 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
479
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 6, 2026
djj62478
Electrical Ron Francis Headlight / Alternator Harness
  • dan50
  • Apr 30, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
337
Fox 5.0 Mustang Tech Apr 30, 2026
dan50
Problems after exhaust install and 02 harness
  • djj62478
  • Jul 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
602
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
1
Electrical Headlight harness trouble
  • 1985fox
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
485
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?