So I put together the entire car and now I'm held up by a wiring short. I can get the main harness disconnected like I've done 20 times in the past, leads me to believe that is where my issue is.
Here is the stubburn bolt that turns but does not seperate the two plugs
Here is what the inside of the plug looks like (pic taken from my spare harness)
and this little washer fellow is what prevents me from just pulling the bolt out.
I'm at a loss for ideas besides spending the next 3 days drilling the long bolt out.
Here is the stubburn bolt that turns but does not seperate the two plugs
Here is what the inside of the plug looks like (pic taken from my spare harness)
and this little washer fellow is what prevents me from just pulling the bolt out.
I'm at a loss for ideas besides spending the next 3 days drilling the long bolt out.