Engine Mount Help!

[69clark]

I am about ready to pull my engine and wanted to know what the best way to unbolt the engine mount. Should I unbolt it from the motor or unbolt it from the chassis. I ask because looking at a pic of the mount it looks like the bolts bolt to the chassis at a 45 degree angle and I am not sure if it will catch on the chassis when I pull it with them still bolted to the motor. Thanks Guys!

 

[urban96]

i unbolted from the chasis (k-member) if you jack the car up and get under there you can see the bolts pretty easily, only 1 on each side. soak em eith some lube first and they should come right off

 

[mytight95]

i unbolted from the chasis (k-member) if you jack the car up and get under there you can see the bolts pretty easily, only 1 on each side. soak em eith some lube first and they should come right off

yup, just done the unbolting them thing.....lol


jason

 

[ProKiller]

your never going to reach the block bolts while its in the car. there are too many brackets in the way to get on them. unbolt it from the k-member. spray some lube like urban said. might be a bit hard to break it but they turn pretty easy once u do.

 

[VibrantRedGT]

There are only two 15/16th nuts that need to be removed which are located in the motor mount area.

 

[Stangfreak95]

Chassis is way easier