• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Engine Stays Running After Key Off..

  • Thread starter Thread starter Mustang78
  • Start date Start date Apr 28, 2007

Mustang78

New Member
Feb 8, 2006
486
0
0
Aberdeen, WA
Apr 28, 2007
#1
  • Apr 28, 2007
  • #1
engine stays running after i turn the key off, samewith the electric fan which gets power from the starter, any ideas? Thanks i have to pull a plugwire to kill it

~Mark~
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Apr 28, 2007
#2
  • Apr 28, 2007
  • #2
I would have to say you don't have your ignition wired properly and your alt continues to supply power when you key should be killing it.
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 28, 2007
#3
  • Apr 28, 2007
  • #3
what have you changed or done recently?
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Apr 29, 2007
#4
  • Apr 29, 2007
  • #4
does the radio turn off? If not then your problem is in the ignition switch.
 

86nu

New Member
Jan 6, 2007
94
1
0
Birmingham, Al
Apr 29, 2007
#5
  • Apr 29, 2007
  • #5
93 LX said:
does the radio turn off? If not then your problem is in the ignition switch.
Click to expand...



+1
 
T

tylerrocks

New Member
Oct 13, 2005
514
0
0
Big Spring, TX
Apr 29, 2007
#6
  • Apr 29, 2007
  • #6
what is the timing set at?
 
T

TheUser

Active Member
Jul 25, 2003
1,859
1
36
Springfield, MO
Apr 29, 2007
#7
  • Apr 29, 2007
  • #7
My first thought was the ignition switch, too, when I first saw this post last night. I wanted to see what others thought.

Why is the electric fan wired to the starter? Do you mean starter relay? That still makes no sense since the starter relay is connected to the battery and has constant 12v on one side and only has 12v on the other side when cranking. However, that's why the fan stays on...it's wired to a constant 12v.
 

Mustang78

New Member
Feb 8, 2006
486
0
0
Aberdeen, WA
Apr 30, 2007
#8
  • Apr 30, 2007
  • #8
the radio goes off, the main fan power is to the battery side of the solenoid, and yellow "switch" wire is hooked to a key on only wire i found under the hood, i think its green..anyway this all started prom night, when i got to dinner(an hour away) all was fine except the problem was still there, so after dinner i start it up cold with the fan running(it shouldent run when cold) and go to the gas station, after leaving there 30ft away i see smoke barreling from under the hood, i slam the brakes, swerve to a parking spot, kill the engine, pop the hood and jump out..there is visible smoke and strong burnt wires smell so i check everything for hot wires(hot to the touch) and found nothing unusual, so i have my g/f turn on the key and the stupid E fan controller is smoking like a SOB, so i unplugged the fuse from it, turn the key back on and it still smoked, unplug the relay on it and it STILL smokes, WTF?? so i cut the wires to the controller with my pocket knife(all this while wearing a tux in the outback steakhouse parking lot...), check for smoke and head for the highway..i made it home ok without overheating(2K RPM's at 70mph for an hour) and got my truck for the night..stupid fan controller, the first one i bought went out for no obvious reason(adjustable), the second one was preset at 185 and came on waay too late for my taste, so then i buy this one, thinking it was OK and another 60.00 down the toilet..i want to put on my clutch fan..how much HP will i lose with a clutch fan? i will miss the sound of the serpentine belt whining. Thanks for the help and i wired everything correctly, this was most definately a faulty product and not my fault

~Mark~
 

Mustang78

New Member
Feb 8, 2006
486
0
0
Aberdeen, WA
Apr 30, 2007
#9
  • Apr 30, 2007
  • #9
from what i gather the fan controller relay stuck ON, which kept the fan running and sent power from the yellow wire(i guess its the alt. wire also..oops) to the fan, which went through back to the solenoid which basically told the alternator to keep running cuz the key is ON...its hard to explain but basically i need a new(better?) fan controller and a better spot to hook up my key ON(yellow) fan wire to..or put my stock clutch fan back on, what a crappy night..(up until we got to the motel room for the night)

~mark~
 
T

TheUser

Active Member
Jul 25, 2003
1,859
1
36
Springfield, MO
Apr 30, 2007
#10
  • Apr 30, 2007
  • #10
If you really want the best controller around, get a Delta Current Controller from www.dccontrol.com. It may take a couple weeks for it to come in, so don't order it and plan to have it in this weekend. However, the consensus is that it's well worth the wait. I've had mine for about a year and a half and it works great. While you can hook it up to only have power when the ignition is on, I don't have that feature hooked up on mine. My fan will usually run for about 30 sec when I shut my car off and then the fan kicks off and I have no problems.

The controller is about $110; I purchased the optional light to put inside the car to tell when the fan is on and how much (green fan is off, and it changes shades of orange as it kicks on until it goes fully on and then it turns red). I love the light so I know what my fan is doing and the light is only $10. Shipping was about $8, so my total order was about $128 and was worth it to not have to dick around w/ relays and other POS controllers.

You get what you pay for.
 

Mustang78

New Member
Feb 8, 2006
486
0
0
Aberdeen, WA
Apr 30, 2007
#11
  • Apr 30, 2007
  • #11
i've been looking into that, i plan on sp[ending about 500-600.00 this week on the 351w rebuild kit, head studs, special brackets, etc.. so it wont be anytime soon, thanks for the info i've heard nothing but good about the dccontrol controller

~Mark~
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 30, 2007
#12
  • Apr 30, 2007
  • #12
You can probably fix your existing situation with new power sourcing and blocking diodes. The diodes prevent backfeed.

Good luck.
 

Mustang78

New Member
Feb 8, 2006
486
0
0
Aberdeen, WA
Apr 30, 2007
#13
  • Apr 30, 2007
  • #13
hmm..i need to take the controller out and look but it must be melted to my fan shroad..it smoked for a minute at least before i slowed down enough to see the smoke coming from the grille, i'll PM you HISSIN50 if its saveable

~Mark~
 
You must log in or register to reply here.

Similar threads

Engine Keeping O2 sensors lit with long tube headers
  • keel
  • Jul 30, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
286
Fox 5.0 Mustang Tech Aug 21, 2026
Qtrhrse23
9
1997 gt Starts then dies a few seconds after.
  • 97orange
  • Aug 13, 2026
  • SN95 4.6L Mustang Tech
Replies
5
Views
316
SN95 4.6L Mustang Tech Aug 17, 2026
97orange
9
D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
207
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
405
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
246
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?