engine swap and get the damn thing to start on a dime.

6

65stang289

New Member

Mar 5, 2003

922

0

0

Fort walton Beach FL.

Nov 23, 2005

#1

• Nov 23, 2005

• #1

engine swap and cant get the damn thing to start on a dime.

I pulled the engine out of the mustang and put it in my truck. The damn thing has trouble starting every time I have to move the dist. to get it to run. IT is starting to smoke from the cables on both sides. Do I have a bad ground I have 2 grounds on there. I can get it to start but the damn thing is fighting hard like it is too tight and if I back it down it just back fires through the carb. Need help bad this is my daily driver.

 

1

1969mach1351

Member

Apr 18, 2003

285

0

16

Sacramento, CA

Nov 24, 2005

#2

• Nov 24, 2005

• #2

Don’t know if this could be the same thing but my Escort was having a hard timing starting and would only start if I moved dist. It turned out to be a bad coil.

 

6

65stang289

New Member

Mar 5, 2003

922

0

0

Fort walton Beach FL.

Nov 24, 2005

#3

• Nov 24, 2005

• #3

I gave that a shot on day 4 but with no luck. Do you guys think it could be a bad ground doing all this. when I get it running it is fine runs good and all. Just cant get the damn thing to start up with out messing with it.

 

krash kendall

Active Member

Nov 19, 2004

1,258

0

36

Aldergrove, B.C. Canada

Nov 24, 2005

#4

• Nov 24, 2005

• #4

If your cables are smoking then they are probably shot. The heat is a byproduct of resistance and the heat then damages the cables more making the problem worse. How did the engine start when it was in your mustang? Are they the same cables?

 

6

65stang289

New Member

Mar 5, 2003

922

0

0

Fort walton Beach FL.

Nov 24, 2005

#5

• Nov 24, 2005

• #5

The engine would fire up just fine in the mustang not a problem at all. I did not take the cables from the mustang and put them in the truck. I will try and find some othere cables I have and put them on to see what happenes.