• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

engine ticking

  • Thread starter Thread starter whitetoast11
  • Start date Start date Jun 24, 2004
W

whitetoast11

New Member
Nov 12, 2003
1
0
0
Jun 24, 2004
#1
  • Jun 24, 2004
  • #1
ok here goes one of my first posts. I am very new to having a ford 5.0, I recently just finished my big project to put the monster engine into my 1987 jeep wrangler. In my engine bay is a 5.0 cobra motor, edlebrock heads, kenne belle low psi blower, headers, in other words it is decked out to go fast. although my 4.11 gears and 32 inch tires do seem to give it a relatively slow start for what I feel it should be at. I bought the engine used and still have its original spark plugs, its time to change them out,,, I need reccomendations, i've always loved Denso spark plugs, yet i'm very unsure how cold or hot to get them for this particular engine.

Also i've been having heat issues all year as the engine produces a ton of heat, just yesterday I overheated on the freeway and now there is an audible ticking coming from the passenger side at idle speeds, although right before the overheating i did hear a much louder similiar noise,,, I had the top down though so I was very unsure as to wether it was an engine noise or just the seatbelt flapping the role cage. I pulled over in time well enough for no oil/radiator fluid to be spotted on the ground so at least thats good.

Basically i'm looking for advice, it ran like a charm in the winter, but not as well in the summer, and as I mentioned before, seems as if it should have more kick for the power its got.

I'm especially at a loss of which plugs to go with as well as the cooling issue, any help is apreciated.

~Jason
 

1fast94svt

New Member
Jun 14, 2004
205
0
0
Michigan....Detroit
Jun 25, 2004
#2
  • Jun 25, 2004
  • #2
Either a head gasket is bad, or you have a header gasket leak, or where the headers meet the rest of the exhaust. most likeley header or head gasket.
 
K

k12

New Member
Jul 28, 2003
130
0
0
Jun 25, 2004
#3
  • Jun 25, 2004
  • #3
Ive got an 89 wrangler and have been thinking of doing a 5.0 swap. Tell about how it was to do it and what was swapped in!

I dont know about the plugs, but I would start at the simple, i.e. what he said about the exhaust leak, and then work your way into the more complex/serious issues. As for overheating. The two most likely culprets are either a worn clutch fan (if used) or thermostat stuck partially/mostly closed. If not either of those, then radiator may need flushed.

Let me know about the swap and what the prob ends up being!

K12
 
You must log in or register to reply here.

Similar threads

Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
576
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
26
Views
561
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
CAMTWO1070
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
122
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
A
Check Engine codes jumping around
  • azactor
  • Jan 9, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
160
1996 - 2004 SN95 Mustang -General/Talk- Jan 10, 2026
gkomo
R
New Member, needs help with built '04 engine
  • rollo19
  • Aug 6, 2025
  • The Welcome Wagon
Replies
1
Views
128
The Welcome Wagon Aug 6, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?