• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

erattic idle, TPS?

  • Thread starter Thread starter riceater89-5.0
  • Start date Start date Jul 19, 2004
R

riceater89-5.0

New Member
Jun 3, 2004
55
0
0
kentucky
Jul 19, 2004
#1
  • Jul 19, 2004
  • #1
ive had a problem for a while now, in that every time i hammered down on my car, then came to a complete stop, it would idle at like 2000. i always found that if i kicked the throttle to the floor, it would idle back down to about 700. i recently replaced the TPS and now it will idle itself up like that a lot more often, i dont even have to hammer down on it any more and it will start idleing to high, but i can still fix it the same way, kick the gas to the floor one time while im stopped, and it idles back down. any ideas?
 

GREG91GT

Member
Jun 3, 2004
207
0
17
MISSOURI
Jul 19, 2004
#2
  • Jul 19, 2004
  • #2
did you check the voltage of the tps
 

Snouter

Libertarian Lunatic
Nov 4, 1999
2,014
0
46
Connecticut
Jul 19, 2004
#3
  • Jul 19, 2004
  • #3
The only problems I have had with the TPS is actually when the car would stall out and not start unexpectedly. The code reader indicated the relevent number for a bad TPS in that case. A replacement TPS instantly fixed the problem. Check for codes in case it is that emissions sensor also attached to the throttle body which is another $30 item if it needs replacement.

You can fine tune the TPS by measuring the voltage and twisting it after elongating the screw holes and then making adustments to get your desired voltage if the unit is good, but it sounds like if the problem might be the idle air bypass thing on the throttle body. Remove it, clean it with gumout, and reinstall. Also clean all the oily carbon buildup on the throttle door. Also, sand off the carbon buildup on the interiot of the distributor cap, and pour a bottle of Redline fuel treatment in the next fill up and see if helps clean up things.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 19, 2004
#4
  • Jul 19, 2004
  • #4
do you have a vac leak? stock-ish motor should have 15-20 inches at idle.
good luck.
 
You must log in or register to reply here.

Similar threads

7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
694
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
F
Engine 1988 Foxbody idle issues
  • fernandosgarage55
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
714
Fox 5.0 Mustang Tech Apr 30, 2026
AeroCoupe
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
115
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
8
Foxbody high rpms and surging rpms
  • 86foxseth
  • Jun 9, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
227
Fox 5.0 Mustang Tech Jun 13, 2026
Noobz347
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
832
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?