Exhaust Clip Mega Thread

FrankenStang

Now, give me a damn CT!

15 Year Member

Apr 16, 2005

4,461

70

129

Florence, Az

Oct 21, 2008

#1

• Oct 21, 2008

• #1

Post em up.

No comments, just good quality clips. This will be added to the http://forums.stangnet.com/765506-5-0-sticky-stickies.html thread.

 

SteedaGT9150

Advanced Member

Nov 10, 2004

1,351

59

68

Maryland

Oct 21, 2008

#2

• Oct 21, 2008

• #2

View attachment 296067

 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

15 Year Member

Nov 11, 2003

6,945

1,598

223

Northern KY

Oct 21, 2008

#3

• Oct 21, 2008

• #3

My clips are almost all with an X, but i do have some that are all Mac with a Pro Chamber and the Flowpaths. Otherwise they're labeled as such:


Magnaflow:
View attachment 296043
View attachment 296045

Magnaflows without tail pipes:
View attachment 296046

Forza Flow 3'' (same as Flowmaster 2 chamber 3'')
View attachment 296048

Mac Pro Chamber with Flowpath mufflers:
View attachment 296050
View attachment 296052

Mac setup, dumped:
View attachment 296054
View attachment 296056
View attachment 296058

Custom 1 chamber Flowmasters (2 chambers with the rear chamber cut off and welded back up) with 3'' tail pipes:
View attachment 296061

Dynomax Race Bullets dumped:
View attachment 296063

Here's what a 11.5:1 compression, 400+hp 347 sounds like with Mac full lengths, an X pipe and a Mac cat-back (my buddy's car):
View attachment 296065



Unfortunately i didn't start doing the driving style clips until i got the Magnaflows, but they're better than nothing i guess. In my opinion, two things i'll never spend money on again are the Mac Pro Chamber (i'll never run anything but an X) and Race Bullets. Even an X couldn't make the Bullets sound good.

PLEASE DO NOT QUOTE THIS WHOLE POST

 

1991notchbackLX

Active Member

Dec 25, 2007

1,483

47

48

New York

Oct 21, 2008

#4

• Oct 21, 2008

• #4

wow dude you change exhaust setups like some people change their underwear


(a few times a year )

 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

15 Year Member

Nov 11, 2003

6,945

1,598

223

Northern KY

Oct 21, 2008

#5

• Oct 21, 2008

• #5

That's over about a 3 year period but at one time i think i did have 3 sets in the span of a month.

Why not? It's the single easiest way to make your car like new again, aside from a new set of wheels, but exhaust is cheaper. Once you get a good X pipe and a good set of tail pipes, if you get a set that are slip on style, you can swap out mufflers in about a half hour and you don't have to spend the money on a full cat-back to get the change, you just buy new mufflers and go (usually less than $150).

 

MY 85 GT

10 Year Member

Mar 7, 2008

1,852

208

104

New Jersey

Oct 21, 2008

#6

• Oct 21, 2008

• #6

This was my 85 GT just sold it...It was all Mac...Mac long tubes...Mac off Roag H-pipe and mac cat back...

YouTube - 85 mustang GT

 

ryan218

In just 10 years, I'll be old enough to drive!!!!

Dec 28, 2005

0

1

38

columbus ohio

Oct 21, 2008

#7

• Oct 21, 2008

• #7

Bone stock
http://videos.streetfire.net/vidiac.swf?video=5129e694-3855-4010-894d-9b2e01256eb7

BBK shortys
Catless X pipe
Stock Catback


http://videos.streetfire.net/vidiac.swf?video=5129e694-3855-4010-894d-9b2e01256eb7

 

90lxcoupe

20+ Year Stangneter

Oct 7, 2003

3,596

350

134

Oct 21, 2008

#8

• Oct 21, 2008

• #8

YouTube - Mustang On Chassis Dyno

Bassani stepped headers, 3" X-pipe, and spintech pro streets... this exhaust was live-able with my 302/novi2000 combo but now it is a tad on the obnoxious side with the new motor. and when i say a tad, i mean way to freaking loud. i love the tone the car has now, but im switching to 3'' magnaflow's

 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

15 Year Member

Nov 11, 2003

6,945

1,598

223

Northern KY

Oct 21, 2008

#9

• Oct 21, 2008

• #9

90lxcoupe said:

YouTube - Mustang On Chassis Dyno

Click to expand...

UNEARTH!!!

 

cenok is family

15 Year Member

Jun 25, 2003

1,409

69

79

Norman, Ok

Oct 21, 2008

#10

• Oct 21, 2008

• #10

all the mods in my sig minus the thumper heads and afm cam:

View attachment 295949

all the mods in my sig plus the thumpers and cam:

View attachment 295951

 

25thmustang

Mustang Master

Sep 5, 2003

2,021

85

99

Montgomery, NY

Oct 22, 2008

#11

• Oct 22, 2008

• #11

Mac 1-5/8" Long Tubes
VRS 2-1/2" O/R X
Spintech 2-1/2" Mufflers

YouTube - 5.0 exhaust video

 

fford

Founding Member

Nov 29, 2000

1,020

0

37

Palmyra, PA

Mar 27, 2009

#12

• Mar 27, 2009

• #12

how do you post a video link on here from my computer? Do I have to load it up to some site or something?

 

I

ike34

Member

Jan 16, 2004

156

12

19

Waterloo, IA

Mar 28, 2009

#13

• Mar 28, 2009

• #13

Borla Pro XS Series Mufflers

Heres a video of mine, its not the greatest I had no traction till 3rd gear!

I have shorty headers and a offroad x-pipe and borla pro xs mufflers

YouTube - 1989 Mustang 5.0L

 

IApony

Member

Jan 15, 2008

44

1

9

IA

May 8, 2009

#14

• May 8, 2009

• #14

heres a short clip of mine


YouTube - MOV01364

 

Duncan McDougal

Active Member

Aug 17, 2005

99

0

27

Gainesville, FL

Jul 12, 2009

#15

• Jul 12, 2009

• #15

Exhaust video; FRPP 1 5/8" headers, pypes 2.5" catted x-pipe, and flowmaster american thunder catback (super 44's)
View attachment 251691

 

Darkwriter77

Resident Ranting Negative Nancy

5 Year Member

Jul 1, 2005

314

281

134

Apache Junction, AZ

Jul 12, 2009

#16

• Jul 12, 2009

• #16

1. UPR cat'ed X-pipe (GARBAGE) with Pypes Violator mufflers and Dynomax 2.5" tails;
2. Jeg's off-road X-pipe with Dynomax Super Turbo #17676 mufflers and side-exits AND a really bad leak at the header flange (oops);
3. Same as #2, minus the header flange leak.

UPR cat'ed X + Violators/Jeg's O/R X + Dynomaxes Video by That Dave Guy - MySpace Video

FWIW, the side-exit combo sounds good with an off-road H-pipe or stock H-pipe, but for some reason with an off-road X-pipe it sounds like poop. Also should have gone with straight-out exits instead of trying to use elbows to sweep them backward, as it wound up looking kinda stupid. Ultimately, I went back to the Violators and Dynomax tails with the Jeg's X-pipe and I'm overall pretty happy with it - much louder, more raspy, but still no drone.

 

1987LXragtop

Member

Jan 26, 2008

837

3

18

Just outside Philly PA

Jul 14, 2009

#17

• Jul 14, 2009

• #17

YouTube - Mustang exhaust

running a little rich and a belt squeal was annoying.

YouTube - Mustang exhaust 2

corrected the squealing

 

Kumm3

Founding Member

Jul 30, 2002

527

33

69

East Hartford, CT

Aug 26, 2013

#18

• Aug 26, 2013

• #18

331 Dart Stroker, AFR 185s, EFI Spyder Intake, XE282HR Cam (.565/.574), Bassani Equal Length Headers, Bassani Catted X-pipe, Bassani Catback w/ Flowmaster Tailpipes.

View: https://www.youtube.com/watch?v=O_-mr3Q-2JQ

 

elarm1

10 Year Member

Dec 17, 2010

1,428

652

154

N.Va

Aug 26, 2013

#19

• Aug 26, 2013

• #19

View: https://www.youtube.com/watch?v=_msHXShB3Nw


306, AFR 165 heads, trick flow stage 1 cam, bbk long tubes, bbk catless mid pipe, flow master super 44 mufflers

 

89stang1

Stroked and Juiced

10 Year Member

Nov 5, 2008

730

234

74

nj

Aug 26, 2013

#20

• Aug 26, 2013

• #20

mods in sig
mine idling
View: http://youtu.be/yyCfumXHOqQ

banging a couple gears down my favorite highway on ramp
View: http://youtu.be/yuFuBPB8NII