Fox Exhaust question. fitment?

[James V]

Buying an exhaust system for my 93 notch, i really like these tailpipes
https://lmr.com/item/FLO-15820/87-93-Mustang-50L-Lx-Flowmaster-Aluminized-Tailpipes

they are 3" in diameter. I also want to get the kit below but its 2.5 in diameter, will it fit?

https://lmr.com/item/SVE-5250B-K/1986-93-Mustang-25-Off-Road-H-Pipe-Exhaust-Hanger-Kit

also what size mufflers and inlet pipes do I need if I get the 3" tailpipes?

thanks

 

[General karthief]

Those both will work, mufflers with 2.5" inlets and outlets and you can get a 2 .5" to 3" coupler, those 3" tail pipes are a tight fit, you gonna have a shop install them?

 

[James V]

Those both will work, mufflers with 2.5" inlets and outlets and you can get a 2 .5" to 3" coupler, those 3" tail pipes are a tight fit, you gonna have a shop install them?

Thanks for the help. I originally was going to do them myself, but if you're saying they are tough maybe I'll bring them to a shop.

 

[General karthief]

I've fitted pipes lay'n on my back and using muffler clamps, not any fun and the clamps look ugly, some tail pipes you get are two piece. Should not cost much to get a muffler shop to fit and weld them in. If you have access to a lift and a buddy that can weld offer him alcohol and a hooker to help you.