Exhaust Questions

[RoadconeTuning]

i know its not true but im starting to believe that all 02+ GT's came w/ Flowmasters Welded in... every one that i have seen lately that was "stock" has had weld in flows.

now that i have the stupid statement/question out of the way... how retrictive is the stock Catback and what size is it? should i get a midpipe before i change my catback as it has already had the mufflers replaced? and how does the MAC Prochamber compare to other midpipes.

 

[03ghoststang]

i know its not true but im starting to believe that all 02+ GT's came w/ Flowmasters Welded in... every one that i have seen lately that was "stock" has had weld in flows.

now that i have the stupid statement/question out of the way... how retrictive is the stock Catback and what size is it? should i get a midpipe before i change my catback as it has already had the mufflers replaced? and how does the MAC Prochamber compare to other midpipes.

well the stock dia. is 2.25" and it is very restrictive, a O/R prochamber with a C/B will give you good gains and there dia. is 2.5"

 

[RoadconeTuning]

would a prochamber sound good w/ flows or is that to much chamber... if that makes sense

 

[03ghoststang]

well on the muffler setup everyone has there personal choice, but to answer your Q yeah it will

 

[RoadconeTuning]

i guess im asking if it will sound like a catless xpipe and flows, i hate how that sounds.

 

[propellerhead]

The Prochamber is more like an H, but a little deeper. I'm not a fan of the crackle that X-pipes seem to give out either.

 

[RoadconeTuning]

ok so you get the sound of the h-pipe but the hp of the x w/ the prochamber correct?

 

[propellerhead]

The hp differences are like 1-2, if I remember right. If you prefer the deep muscle car rumble, get an H or Prochamber and be done with it. Make up the extra 1-2 hp with a different mod. Or just enjoy the smiles per mile of the rumble.

 

[RoadconeTuning]

ill make up the extra 1-2hp and enjoy the smiles per mile

 

[RoadconeTuning]

double post...

 

[RoadconeTuning]

another question... Is there a kit i can get that is 2 1/2 or 3" that will give me all the pipe i need to make a catback using my own mufflers.... i like the sound of mine but i want more flow, can i do this?

 

[propellerhead]

another question... Is there a kit i can get that is 2 1/2 or 3" that will give me all the pipe i need to make a catback using my own mufflers.... i like the sound of mine but i want more flow, can i do this?

I haven't heard of anything like that. If there is one, it will probably cost more than just getting a full catback.