f cam,e7 heads on an 86 motor

[dastang2]

will an f cam and e7 heads work with an 86 motor.

 

[88stangmangt]

im not sure if the 86 motor is with the HYD roller cam set-up...but i know for sure the pistons need to be upgraded or notched for valve clearance.....if you looking to make noise.....put a B303 in and some new valve springs it makes plunty of noise and has a wicked IDLE.

 

[dastang2]

ok that was what i needed to know. there is an 86 motor for 100 bucks near me but don't wanna be using a stock cam. btw it is roller.

 

[Bad92GT]

just throw some keith blacks in it and you'll be good to go with fitment