factory temp sender delete

rockyracoon

10 Year Member
Nov 23, 2005
874
27
49
margate NJ
is it ok to remove it or does the computer use it .I took mine out so I could install the probe from my mech temp gauge.Im thinkin that the computer uses the ECT. isnt the temp sender just for the factory gauge.
 
Like everyone has said it cool to take it out.

There are 2 temp sensors on the car. The gauge sensor which you took out to put the mechanical sending unit in. All that the stock sensor does is drive the stock gauge in the cluster. No more no less. Its located at the drivers side front corner of the intake.

The other sensor is the ECT, engine coolant temp sensor, and it is located on the black coolant piping that runs along the passenger side of the intake. This is the sensor that give the computer feedback on what temp the car is running so it can adjust timing and such.
 
One issue is that people use the wrong terminology, which creates confusion. The guage uses a temperature sending unit, or sender.

The ECT uses a temperature sensor. There is one sensor and one sender.