Roush Faleen in the making ... which springs for a safe non damaging ride?

[exindust]

Currently i have H & R Supersports and im thinking that may be a tad too low for the saleen kit... right?.... if i were to switch the springs out which would give me a good drop, while keeping the body safe?

Pro Kit?

 

[88FoxSaleen]

a Saleen clone needs the Saleen/Racecraft springs. this is what i used in my Saleen repo. takes the guess work right out of it. you will already know the ride height & that it will be safe w/ the Saleen kit on it.

Jay

 

[exindust]

Any idea where those can be purchased?

 

[88FoxSaleen]

ebay. all kinds of Saleen parts go though there. if you dont find it right away just wait on it. you can also go to the Corral classifieds & post an ad in the suspension forum as to what you want (Racecraft springs).
either of these should bring results sooner or later.

Jay

 

[sstrayer]

I originally had the prokit's all around but the gap on the front sucked, about twice as high as the rear. I now have SuperSports on the fronts and love the height. They are streetable if you drive pretty careful. Not pulling too far into parking spots, taking dips at a 70 degree angle, and generally avoid speed bumps. You can also look into an MM coilover setup. http://www.maximummotorsports.com/coilover.asp

 

[marcus95]

Shaun,

Your blue vert always looks sick! That's a great shot. Gotta love that "E' hood also.


Peace

 

[sstrayer]

Shaun,

Your blue vert always looks sick! That's a great shot. Gotta love that "E' hood also.


Peace

Thanks Marcus, I appreciate it.

Shaun

 

[exindust]

hmm... ok well ill put my MM isolators in and see how it goes... im picking up my stuff from saleen tomorrow...

Thanks for the imput and pics... AWESOME car BTW totally awesome

 

[Mstng2]

See the "other post about springs. The Maxspeed set puts the Saleen kit perfectly 1 inch above 98% of the parking lot curbs