• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Fan Clutch Question

  • Thread starter Thread starter miksax
  • Start date Start date Oct 25, 2005
M

miksax

New Member
Jul 5, 2005
48
0
0
Oct 25, 2005
#1
  • Oct 25, 2005
  • #1
Hey Guys-
I think my fan clutch is dying--my fan spins after I shut my car off. The car doesn't run hot (yet) but I ordered a new fan clutch and fan. I didn't see an explanation in the Haynes Book, so I'm kinda in the dark on the job. Is there any tricks, secrets, or tips for the job? Any advice would be great, thanks!

Mike
 

Darkwriter77

Resident Ranting Negative Nancy
5 Year Member
Jul 1, 2005
315
283
134
Apache Junction, AZ
Oct 25, 2005
#2
  • Oct 25, 2005
  • #2
Takes an 8mm socket for the top two fan shroud bolts (or maybe it was 10mm?), a 10mm box-end wrench for the pulley bolts, and a big ol' honkin' Crescent wrench for the fan clutch. Use the 10mm wrench as a back-up while breaking loose the fan clutch, and leave the belt on until you've got all four pulley bolts loose - leaves tension on so it won't slip outta your grasp as easily.

A good fan clutch should allow you to be able to turn the fan by hand while the motor's off and cool, but there should be a sufficient amount of drag on it - when it's warmed up and switched off, it should be more difficult to turn by hand (as long as you've got a thermal fan clutch). If it just freewheels and spins like a top with the motor off, it's probably shot.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 25, 2005
#3
  • Oct 25, 2005
  • #3
Yep. Did you get a plastic replacement fan blade or metal? If you live in a hot climate and got a metal replacement, it should do you very well.

When you remove your old one, if you see silicone fluid leaking out of the hub, that indicates it had seen better days.

Good luck.
 
You must log in or register to reply here.

Similar threads

Engine Which fan clutch ?
  • AnthonyA1234
  • Jun 22, 2026
  • Fox 5.0 Mustang Tech
Replies
19
Views
595
Fox 5.0 Mustang Tech Sep 19, 2026
Mustang5L5
F
Engine 1988 Foxbody idle issues
  • fernandosgarage55
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
1K
Fox 5.0 Mustang Tech Apr 30, 2026
AeroCoupe
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
716
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
D
Engine Is the oem clutch fan always supposed to be running?
  • dqureshi06
  • Sep 13, 2024
  • Fox 5.0 Mustang Tech
Replies
2
Views
303
Fox 5.0 Mustang Tech Sep 13, 2024
Mustang5L5
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?