Fan Switches

[94-302-vert]

OK, So i have lookedn into this for a while. Is it really this easy:

High Speed fan: Goal is to ground pin #17 on CCRM (green with purple tracer) through a switch

Low speed fan, ground #14 (dark blue) through a switch

Is that all there is to this?

Anyone have a pic of the CCRM? I am wondering if this is what I think it is or not.

Thanks!

 

[Stanger007]

Here's some CCRM pics: http://www.mustang-tech.org/wiki/94-95_Mustangs_Electrical_CCRM

Fan switch stuff: http://www.mustang-tech.org/wiki/94-95_Mustangs_Cooling_Fans (I have not verified this information - anyone?)

Wes

 

[HISSIN50]

Wes has you covered.

To be real explicit in case you are working quickly and skim over Wes's article, DO NOT ground Pin 14.

Good luck.

 

[Dino Dino Bambino]

OK, So i have lookedn into this for a while. Is it really this easy:

High Speed fan: Goal is to ground pin #17 on CCRM (green with purple tracer) through a switch

Yes

Low speed fan, ground #14 (dark blue) through a switch

No. You need to feed 12v to pin 14 through a switch, not ground.

Is that all there is to this?

Anyone have a pic of the CCRM? I am wondering if this is what I think it is or not.

Thanks!

 

[94-302-vert]

So ground #17 for HS fan, power #14 for low speed fan.

Got it.

Thanks guys...