• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Fan went out, any suggestions?

  • Thread starter Thread starter Joe 5.0
  • Start date Start date Aug 21, 2005

Joe 5.0

Founding Member
Feb 1, 2002
1,184
2
38
Macomb, MI (metro detroit)
Aug 21, 2005
#1
  • Aug 21, 2005
  • #1
This past week it was making all sorts of not so nice whining & grinding sounds and now it isnt working at all. I pulled it out real quick and just wonder if I should do anything other than buy a replacement motor. Is there a cheaper or significantly better aftermarket setup? It would be nice to have some cooler temps, but I dont wanna spend a ton of money if it wont be any better than the stock setup.

Also the extra space from a universal fan would be nice, but how hard are they to install?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 21, 2005
#2
  • Aug 21, 2005
  • #2
How does the rest of the fan look? If it is not lookin too hot, I would use something else. Otherwise, perhaps just swap motors or get a J/Y SN fan.

Good luck.
 

Joe 5.0

Founding Member
Feb 1, 2002
1,184
2
38
Macomb, MI (metro detroit)
Aug 21, 2005
#3
  • Aug 21, 2005
  • #3
The blades and shroud look fine, it just doesnt spin quietly. I would like to replace the whole assembly just because it would look nicer, but I dont wanna drop $200 on a fan.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Aug 21, 2005
#4
  • Aug 21, 2005
  • #4
your gonna drop over 100$ on the motor prolly...... so if you want to change fans now would be the time, but you are gonna be hard pressed to find one that moves more air for a reasonable price, be cool has one, but it is expensive.....

jason
 
W

wytstang

Mustang Master
Mar 14, 2004
4,988
4
78
Summerville,SC missing South Fl. weather :(
Aug 21, 2005
#5
  • Aug 21, 2005
  • #5
Why not look into the mark VIII fans
http://www.geocities.com/smithmonte/Auto/MarkVIII_Fan.htm
There a guy on corral that sells these.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Aug 21, 2005
#6
  • Aug 21, 2005
  • #6
they are huge just so you know..... take as much or more room than stock...
 

ponyboy19

Founding Member
May 24, 2000
1,640
0
36
Aug 21, 2005
#7
  • Aug 21, 2005
  • #7
I'm happy with my Viper Gen II set up. Cost about the same at others and is not only OEM but moves a ton of air with low amp draw. Read all about it
http://forums.stangnet.com/showthread.php?t=524739&highlight=viper
 

Joe 5.0

Founding Member
Feb 1, 2002
1,184
2
38
Macomb, MI (metro detroit)
Aug 21, 2005
#8
  • Aug 21, 2005
  • #8
AZ had a replacement motor for $60, so if I cant find something better for the same price I'm gonna try that.
 
W

wytstang

Mustang Master
Mar 14, 2004
4,988
4
78
Summerville,SC missing South Fl. weather :(
Aug 21, 2005
#9
  • Aug 21, 2005
  • #9
Very nice ponyboy....
 

ponyboy19

Founding Member
May 24, 2000
1,640
0
36
Aug 21, 2005
#10
  • Aug 21, 2005
  • #10
wytstang said:
Very nice ponyboy....
Click to expand...

Thanks..
 

bjl95mustang

Founding Member
Jan 18, 2000
1,495
0
36
Austin,TX
Aug 21, 2005
#11
  • Aug 21, 2005
  • #11
yep the az motor is siemens and the one i took out of my car said siemens/ford.
 

mo_dingo

20+ Year Stangneter
Aug 26, 2003
3,031
2
58
Tucson, AZ
Aug 22, 2005
#12
  • Aug 22, 2005
  • #12
Now is the time to upgrade. If not for any other reason than to save money in the future, in case one of the fan blades craps out on you, etc. Since you are going to drop $60 now, you might as well put that money down on an aftermarket fan of your choice.

You could probably get away with just swapping motors fine. But it seems as our motors get older, they tend to have a harder time keeping cool. And a good fan will really help in that situation.
Scott
 

bjl95mustang

Founding Member
Jan 18, 2000
1,495
0
36
Austin,TX
Aug 22, 2005
#13
  • Aug 22, 2005
  • #13
Damn, the viper setup looks pretty good.
 

Joe 5.0

Founding Member
Feb 1, 2002
1,184
2
38
Macomb, MI (metro detroit)
Aug 22, 2005
#14
  • Aug 22, 2005
  • #14
mo_dingo I know what you're saying, and usually i would agree with you. However, my car runs nice & cool all the time, except when I'm at the road course. A better fan wouldnt help here, a better radiator is my only real solution to that. I'd rather spend that money on a new rear end cover or trans flush, as they are much more needed than a trick fan setup.
 
You must log in or register to reply here.

Similar threads

S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
681
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
972
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
844
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
574
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?