• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Far from perfect

  • Thread starter Thread starter Stever89
  • Start date Start date Apr 22, 2010

Stever89

5 Year Member
Dec 14, 2009
536
9
39
Biloxi, MS
Apr 22, 2010
#1
  • Apr 22, 2010
  • #1


But she's turning heads now... got the 5" tach out and hooked up the stock one, went to the junkyard and got a spare, pwr mirror switch, ashtray and door, lighter etc, fixed the map light, pwr lumbar, glove box light, turn signals, instrument lamps, cleaned up the engine bay (re-routed wires, put them in wire looms etc, touched up the exterior paint and trim, replaced the drip rails, cowling, removed the graphics and lots of other little things that cost very little or nothing at all. Remember I got this car for free, was not running and was in pretty sad shape. I've got right at 200 bucks in her so far. Just a lot of little things, but I'm glad it fell into my hands and left his before it wound up in a junkyard.
View attachment 221969
Found this under the front seat
 

87GT Drop Top

Member
May 1, 2009
500
3
17
South Florida
Apr 22, 2010
#2
  • Apr 22, 2010
  • #2
Looks good so far. You just need to black out that red stripe.
 

Stever89

5 Year Member
Dec 14, 2009
536
9
39
Biloxi, MS
Apr 22, 2010
#3
  • Apr 22, 2010
  • #3
I was going to redo it... but blacking it out is good too.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Apr 22, 2010
#4
  • Apr 22, 2010
  • #4
Wow, you've done great things with the car. Any under hood shots? It's carbed, right?
 

Cobra912

Active Member
May 1, 2005
1,777
11
39
Wish I was anywhere but here
Apr 22, 2010
#5
  • Apr 22, 2010
  • #5
looks very nice. Ditto on the red stripe.
 
9

92GreenGT

PEAT
Founding Member
Jul 18, 2002
2,085
1
46
Big Stone Gap, VA
Apr 22, 2010
#6
  • Apr 22, 2010
  • #6
I'd be damn proud of that car, especially for $200. Keep working on it, one good thing of a project like that is you get to mold it into the exact car you wanted. Yeah a lot of stuff has to be replaced and that'll end up costing a lot in the long run but you get it exactly how you want it and by the time you're done you basically have a new car that YOU built to your liking.

Good job so far buddy.
 

Stever89

5 Year Member
Dec 14, 2009
536
9
39
Biloxi, MS
Apr 22, 2010
#7
  • Apr 22, 2010
  • #7
NikwoaC said:
Wow, you've done great things with the car. Any under hood shots? It's carbed, right?
Click to expand...

Yes it is, good memory!

Not much done here yet, I cleaned it up, there were wires going everywhere, little stuff. I will have to replace the radiator, and I'd like to dump that distributor and go with something else.
 

Stever89

5 Year Member
Dec 14, 2009
536
9
39
Biloxi, MS
Apr 22, 2010
#8
  • Apr 22, 2010
  • #8
92GreenGT said:
I'd be damn proud of that car, especially for $200. Keep working on it, one good thing of a project like that is you get to mold it into the exact car you wanted. Yeah a lot of stuff has to be replaced and that'll end up costing a lot in the long run but you get it exactly how you want it and by the time you're done you basically have a new car that YOU built to your liking.

Good job so far buddy.
Click to expand...

Thanks, and I guess the red stripe will go, but I kinda like it, reminds me of the batmobile

I really don't do things in any rational order, especially when it comes to cars. I've been told I'm doing a "Christine"... I'll fix the seats and next I'm rewiring the fuel pump. I don't really know what I'm going for, I guess it's starting to go towards the sleeper look, if you ignore the hood, tires and the way this beast sounds. Just no gaudiness, rice, or ghetto. When it comes to Mustangs, when in doubt, go stock. If I stick to that I should be fine

I've got auto body refinishing experience, I was an auto mechanic for years and now I'm an electronic engineering tech so that's no issues there.

Way down the road I'd love to put Florida guages in there, and maybe reinstall the A/C.
 

87GT Drop Top

Member
May 1, 2009
500
3
17
South Florida
Apr 22, 2010
#9
  • Apr 22, 2010
  • #9
That GM HEI style distributor doesn't look right in there.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Apr 22, 2010
#10
  • Apr 22, 2010
  • #10
Stever89 said:
Yes it is, good memory!
Click to expand...

Two things I never forget: A lady's name and the specs on a Mustang.

Some degreaser, scotch brite pads and a rattle can would go a long way in that engine bay. Paint up those rusty brackets, you'll be surprised how much better it will look.

Also, is that an unhooked-up A/C compressor? Get that thing out of there if you aren't going to run A/C!

Anyway, things are looking good, man! How does she ride?
 

Stever89

5 Year Member
Dec 14, 2009
536
9
39
Biloxi, MS
Apr 22, 2010
#11
  • Apr 22, 2010
  • #11
NikwoaC said:
Two things I never forget: A lady's name and the specs on a Mustang.

Some degreaser, scotch brite pads and a rattle can would go a long way in that engine bay. Paint up those rusty brackets, you'll be surprised how much better it will look.

Also, is that an unhooked-up A/C compressor? Get that thing out of there if you aren't going to run A/C!

Anyway, things are looking good, man! How does she ride?
Click to expand...

10-4 on the underhood cleanup. I'll be on that soon unless the wife gets irritated with me messing with it so much. So far so good.

Yes the AC is unhooked. What's a realistic affordable alternative?

She rides surprisingly good, but a brake upgrade will have to happen.
 

1987LXragtop

Member
Jan 26, 2008
837
3
18
Just outside Philly PA
Apr 22, 2010
#12
  • Apr 22, 2010
  • #12
200 dollar projects..what I bought mine for too. Nice work I like a nice notch.
 

Stever89

5 Year Member
Dec 14, 2009
536
9
39
Biloxi, MS
Apr 22, 2010
#13
  • Apr 22, 2010
  • #13
87GT Drop Top said:
That GM HEI style distributor doesn't look right in there.
Click to expand...

Yep, it's gotta go.

I was thinking of some kind of Mallory setup with a stock looking dist.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Apr 22, 2010
#14
  • Apr 22, 2010
  • #14
Stever89 said:
10-4 on the underhood cleanup. I'll be on that soon unless the wife gets irritated with me messing with it so much. So far so good.

Yes the AC is unhooked. What's a realistic affordable alternative?

She rides surprisingly good, but a brake upgrade will have to happen.
Click to expand...

This is exactly what I have in my car. Quick, easy, and looks factory.

85-93 Mustang 5.0L A/C Eliminator by Ford Racing at LRS - Same Day Shipping!
 

Stever89

5 Year Member
Dec 14, 2009
536
9
39
Biloxi, MS
Apr 22, 2010
#15
  • Apr 22, 2010
  • #15
NikwoaC said:
This is exactly what I have in my car. Quick, easy, and looks factory.

85-93 Mustang 5.0L A/C Eliminator by Ford Racing at LRS - Same Day Shipping!
Click to expand...
Thanks, man have I got a lot to learn. Is this configuration the one I see where the PS pump is moved up to where the AC was?
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Apr 22, 2010
#16
  • Apr 22, 2010
  • #16
Stever89 said:
Thanks, man have I got a lot to learn.
Click to expand...

You already have the car. The illness has begun. The learning will come.

Stever89 said:
Is this configuration the one I see where the PS pump is moved up to where the AC was?
Click to expand...

Yes.
 

SScott

Powered by LORD
Apr 23, 2004
304
0
16
Alabama
Apr 22, 2010
#17
  • Apr 22, 2010
  • #17
The GM style HEI is ugly but it is one of the best distributors ever made. DUI and many others get 9000 rpm's out of them. Real easy to adjust the advance with the springs on top also. I have a billet one with MSD stuff but gotta get rid of it because my parker intake and N2O won't clear well enough to time easy other wise I would keep my eye sore.

The car is awesome, I look forward to seeing what you do with it.
 

Chrome_Rust

Member
Dec 5, 2008
530
1
17
Findlay, Ohio
Apr 23, 2010
#18
  • Apr 23, 2010
  • #18
I say hook the A/C back up!! It works in mine.... well it will at least...
 

Stever89

5 Year Member
Dec 14, 2009
536
9
39
Biloxi, MS
Apr 24, 2010
#19
  • Apr 24, 2010
  • #19
Chrome_Rust said:
I say hook the A/C back up!! It works in mine.... well it will at least...
Click to expand...

I do plan to get it fixed eventually. It's going to take a lot of work though. It's already getting pretty warm down here in southern MS, and I may get it fixed sooner than I planned!
 
You must log in or register to reply here.

Similar threads

B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
470
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
2
Resolved Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
498
1996 - 2004 SN95 Mustang -General/Talk- Sep 4, 2026
2000ElectricGreen
2
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
R
91 5.0l cranks but no start, fuel pump keeps priming
  • Rhubyn
  • Jun 16, 2024
  • Fox 5.0 Mustang Tech
Replies
7
Views
2K
Fox 5.0 Mustang Tech Jul 29, 2024
4cylredfox89
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?