Feedback in my speakers :(

Your problem is your signal wires going from your head unit to your amp. If they are anywhere near any power wires such as the power wire for your amp, it will cause feedback. You'll probably need to reroute your signal wires and that should fix your problem.

As mentioned make sure the power wires and ground wires do not cross the rca's good rule of thumb is to run them on their own side of the car, also make sure you have a good ground stip the paint back where you attach it. Try that if not there are also ground loop isolators which will cut out noise but if you use good cables and install it good you should not need them. Dan

power wire one side, rcas other, remote can go either side.

97s281clone said:

ok, Thanks guys. Do I need to isolate my remote wire or my RCA's from the power wire? I bet that is my problem since they all run together.

Click to expand...

That will do it, fix that and you should be a happy camper.

one thing you might want to check is...

take your rcas out, and put them back in to both the deck and amp.. i had never heard of or seen this happening before... my stereo had BAD noise, like by far the worst i had ever heard.. myself and a friend of mine who works at a stereo shop(used to be an installer) basically ripped appart the system and put it back together.. removed and reinstalled every component one at a time and couldnt find the problem for the life of me, used diffrent speakers for testing, wires everything.. so we got to the deck and started unhooking things there, and found that when you unhooked the ground from the deck, the deck would stay on (not possible) but the noise got worse
so we unhooked one wire at at time, and found that somehow the deck was grounding through the rca cables onto the chassis of the amp... so i put a small piece of tape on the body of the amp where it was grounding, problem solved..

-Ryan