Fiberglass Doors?

Anyone here have them on their car? Do they use the factory hinges? the reason I ask is, I just took the doors off of one of my coupes, and those things are HEAVY! I have a DD 4 banger, that I am putting a 10pt cage in while the interior is out for paint, so I figured why not go with fiberglass doors! I was also wondering if they use the factory door locks and handles, as well as the window system.

I never even considered them in the past, as I thought they would be unsafe in a wreck, but since I am getting the cage, I figure I should be plenty safe with that.
 
Maier Racing used to sell them but now i don't see them on their site. Personally i wouldn't trust them on a street car unless you run a serious roll cage with X bars accross the doors and a full caged roof...but that's just me. Fiberglass may as well not be there at all in a crash.
 
You can't find them because they're just not safe. It has nothing to do with illegal. If you want lighter doors gut the ones you have but don't take any steel out of them or drill them. Yank the panels off of the inside, remove all of the window parts and put fixed Lexan in the glass' place. Before I touched the doors and/or the front and rear bumpers I would make sure all of the rest of the car has been lightened.
 
go to turbomustangs.com and take a look at the tech section. it tells you in a little detail how to do your own carbon fiber doors. just an alternative if you would like
 
I have fiberglass doors on my car. I cut the mounts off my mwtal doors and welded a plate to them and drilled them and mounted them to the fiberglass doors. They are much lighter. Yes I also worry about someone t-boning me. They also do not seal very well at all. At high speeds the top of the moves out and I can see daylight. I doubt i would install them on any other mustang I do in the future.