Finally did the 5 lug swap

[PJB]

I finally finished my 5 lug swap last night.
I did the rears using Ranger axles and the front using '94 v6 Mustang spindles.
It rolls on '03 v6 Mustang 16" wheels.

Unfortunately its still in the bodyshop.
More pics here:
http://www.cardomain.com/ride/2442696

 

[Mustang5L5]

Those wheels look good on a Fox

 

[nonglossjason]

was it dificult?

 

[grey5.0beast]

too small of rims,but other then that

 

[PJB]

Those wheels look good on a Fox

Thanks.

The swap wasnt terribly difficult. It only took a few hours. I did it on a lift so that was much easier than on the ground.

The reason I went with 16's is that I had just bought new tires for my stock wheels a few months before I decided to do the swap and didnt want to buy another set. I dont really care much for big wheels anyway.

 

[DEFWISH]

was it dificult?

nope, it's fun . great feeling (especially kicking the old drum brakes to the curb) if you go RD

 

[mob]

not feelin the wheels but good job.

 

[TheBocSez]

Are the V6 spindles you used similar to the SN95 spindles so you can use any 5lug wheel?

 

[PJB]

I just slapped on some Ranger drums because its alot easier and I didnt have to change the master cylinder.

 

[PJB]

Are the V6 spindles you used similar to the SN95 spindles so you can use any 5lug wheel?

Theyre v6 SN95 spindles. V6, GT and Cobra models all use the same spindles.