• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Finally got engine running. Got a few ?'s

  • Thread starter Thread starter lefebvrn
  • Start date Start date Apr 11, 2006
L

lefebvrn

New Member
Mar 31, 2005
24
0
0
South Dakota
Apr 11, 2006
#1
  • Apr 11, 2006
  • #1
Just fired up the engine. I had to stab the distribator a few times but got it running. Sounds mean as hell. But I got the fuel pressure at 40 psi but to start it after the first time I had to hold the pedel to the floor then it started. Do I have to much fuel pressure? Also what is the break in for the motor?
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Apr 11, 2006
#2
  • Apr 11, 2006
  • #2
When you put the gas pedal to the floor, you're cutting fuel to the injectors... Meaning it's dumping too much fuel on start up. Try backing out the fuel pressure, or getting a PMS so you can tune things of this nature.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 11, 2006
#3
  • Apr 11, 2006
  • #3
Nick is onto something probably. The 30's might be giving too much cranking-fuel..............

Good luck.
 
L

lefebvrn

New Member
Mar 31, 2005
24
0
0
South Dakota
Apr 11, 2006
#4
  • Apr 11, 2006
  • #4
So back it down to 38 psi and see if that helps. I have timing at 18 degrees advanced. I have ran it for only 10 mins at max I am going to change oil. Then I am going to break the motor in. I searched the threads and I have read to gradually run up the RPM's to about 4000 in 2nd or 3rd gear and let the car slow down by the RPM's. Does this sound right?
 
You must log in or register to reply here.

Similar threads

B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
520
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
537
1996 - 2004 SN95 Mustang -General/Talk- Aug 9, 2026
JohnKay
J
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
734
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
491
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?