• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Finally got one

  • Thread starter Thread starter Mustangless
  • Start date Start date Mar 29, 2004
  • 1
  • 2
Next
1 of 2 Next Last

Mustangless

Member
Jun 27, 2003
903
1
18
home
Mar 29, 2004
#1
  • Mar 29, 2004
  • #1
Have not taken pictures of it since it got home but I am now the owner of a laser red 1994 gt with about 75k miles. It has some marks here and there. First is the dent on the drivers fender and a scratch over the fuel door. there is also a hole in the drivers seat. the car has mac h pipe with cats and flowmaster force II. It has a pulley in the trunk but I am not sure if it is an aftermarket one or just a replace. Car also has a shift kit.



thats the picture the seller had, I will get more hopefully later today. I also have a few questions about some stuff I will ask later

do all of you run 93 octane gas?
 

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"
15 Year Member
Nov 29, 1999
14,679
424
154
Boca Raton, Florida
Mar 29, 2004
#2
  • Mar 29, 2004
  • #2
Welcome to the club! Only run high octane when timing is advanced or pinging is involved.
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Mar 29, 2004
#3
  • Mar 29, 2004
  • #3
lookin good, i see u got clear corners on there too.
 

Mustangless

Member
Jun 27, 2003
903
1
18
home
Mar 30, 2004
#4
  • Mar 30, 2004
  • #4
here are some pictures I took. The front wheels are scuffed up pretty bad and the drivers seat has a little hole in it but you can not see it in the pic













the tail pipes are a little crooked, would look better chrome too going to have to do something about that dent
 

WMDPALMER

Founding Member
Feb 28, 2001
520
0
17
Eglin AFB, FL
Mar 30, 2004
#5
  • Mar 30, 2004
  • #5
Beautiful car man, love that color! Welcome to the club!
 
K

kozo_1

New Member
Oct 11, 2003
18
0
0
Sumter, SC
Mar 30, 2004
#6
  • Mar 30, 2004
  • #6
make sure the exhaust is connected and it has mac and flowmasters before buying check brake and fuel lines if you are in the north
 

5.0 from 95

Founding Member
Nov 6, 2001
738
0
0
Emory, TX
Mar 30, 2004
#7
  • Mar 30, 2004
  • #7
Nice find. If we can ask this, how much did you have to give?


Paul
 

Mustangless

Member
Jun 27, 2003
903
1
18
home
Mar 30, 2004
#8
  • Mar 30, 2004
  • #8
4200 going to clean it up this weekend
 

Zero Signal

Active Member
Feb 24, 2003
2,633
2
46
Tucson, AZ
Mar 30, 2004
#9
  • Mar 30, 2004
  • #9
$4200 seems pretty decent. The way I look at it is; the fender will cost about $650 painted, new seats will run $1000 or so unless you just get them re-covered for about $500 and give or take $1500 for other unforseen stuff and mechanical problems. You're still under $7500 for Laser red rith Black/Black interior

One of these days, I need to convert to all Black interior. . .

BTW, try www.stangparts.com for the fender ($150 used, $250 new)
 

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
Mar 30, 2004
#10
  • Mar 30, 2004
  • #10
Welcome aboard dude and nice 'Stang

Run it regular octane, save money
 
W

wytstang

Mustang Master
Mar 14, 2004
4,988
4
78
Summerville,SC missing South Fl. weather :(
Mar 30, 2004
#11
  • Mar 30, 2004
  • #11
Nice stang, welcome to the club and let the games begin.
 

yellow5.0cobra

Founding Member
Jul 25, 2002
2,849
0
0
In the garage, On the floor.
Mar 30, 2004
#12
  • Mar 30, 2004
  • #12
 

yellow5.0cobra

Founding Member
Jul 25, 2002
2,849
0
0
In the garage, On the floor.
Mar 30, 2004
#13
  • Mar 30, 2004
  • #13
 

yellow5.0cobra

Founding Member
Jul 25, 2002
2,849
0
0
In the garage, On the floor.
Mar 30, 2004
#14
  • Mar 30, 2004
  • #14
Zero Signal said:
$4200 seems pretty decent. The way I look at it is; the fender will cost about $650 painted, new seats will run $1000 or so unless you just get them re-covered for about $500 and give or take $1500 for other unforseen stuff and mechanical problems. You're still under $7500 for Laser red rith Black/Black interior

One of these days, I need to convert to all Black interior. . .

BTW, try www.stangparts.com for the fender ($150 used, $250 new)
Click to expand...
WHAT?

HE can even opt to put 99+ GT seats, which will cost $400 for the pair(COMPLETE FROM HEADREST TO TRACKS),$600 at the most for the complete set front and rear.

$650 for a painted fender?

WHO IS QUOTING YOU THESE PRICES?!?!?

NEw fenders in my neck of the woods are $130... unpainted.

As for the rim... who cares... something called aftermarket... much better selection!

Lets say another $600 to fix all the "other" unforseen problems... such as a brake job, complete tune up, tie rod ends, bushings,sensors...etc.
 

Zero Signal

Active Member
Feb 24, 2003
2,633
2
46
Tucson, AZ
Mar 30, 2004
#15
  • Mar 30, 2004
  • #15
HE can even opt to put 99+ GT seats, which will cost $400 for the pair(COMPLETE FROM HEADREST TO TRACKS),$600 at the most for the complete set front and rear.

$650 for a painted fender?

WHO IS QUOTING YOU THESE PRICES?!?!?
Click to expand...

Conservative estimates dude. You expect things for cheap all the time and you set yourself up for a let down. For the fender, you need to know wther you are getting an original Ford part or not. New replica fenders are cheap, the real Ford ones are usually over $200. The just figure $350 or so for a halfway decent looking paint job for it from a reputable shop.
 

Nucking Futs

Founding Member
Jan 5, 2002
158
0
16
Franklin TN
Mar 30, 2004
#16
  • Mar 30, 2004
  • #16
Now go get you some 4:10's in that thing and it will be a completely different beast. That was the one best mod I ever did but you MUST get a chip to recalibrate the computer. I didn't and it burnt my old tranny up. Get ready for the mod bug to bit. I just told myself I would do the gears but now I have a stroker and more money than I care to think about sunk into it.
 

Kdizzite

New Member
Sep 13, 2003
251
0
0
West Bloomfield, MI
Mar 30, 2004
#17
  • Mar 30, 2004
  • #17
Last year i almost had to buy a new fender and i went to a ford dealer that had it in stock and it was $160.
 

1105

I AM the random post master...bow down
May 3, 2003
3,841
0
0
Daytona Bch, FL
Mar 30, 2004
#18
  • Mar 30, 2004
  • #18
Car looks very clean, just gotta get that fender fixed. Enjoy the car
 

AznStanger3v

Active Member
Aug 11, 2003
2,026
0
47
Northern VA
Mar 30, 2004
#19
  • Mar 30, 2004
  • #19
ebay has fenders for like $25. I would sell you mine, but i got mad when i couldnt get a bolt off of the caliper so i took the hammer and smashed it to hell. Needless to say, i got the bolt off later on and i had no stress at all
 
5

5.0dominates

New Member
Mar 15, 2004
29
0
0
West Covina, CA
Mar 30, 2004
#20
  • Mar 30, 2004
  • #20
yellow5.0cobra, that is one awsome avatar!!! wish I could do that around here but i dont wana spend the rest of my life behind metal bars
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

P
Air Fuel ratio bung location.
  • Praetorious
  • Feb 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
824
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 11, 2026
Noobz347
S
Hello from Minnesota (and the ancient MustangBoards)
  • SpeedofDarkness
  • Aug 24, 2025
  • The Welcome Wagon
Replies
0
Views
178
The Welcome Wagon Aug 24, 2025
SpeedofDarkness
S
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
526
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
B
2001 roush stage 3 - sat for 5 years
  • Brando_05
  • Aug 26, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
228
1996 - 2004 SN95 Mustang -General/Talk- Aug 26, 2025
Brando_05
B
1979 Pace Car Build- #887
  • darryl27529
  • Aug 6, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
Willybill32
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?