Finally got pics [95gt]

[EpiKk3]

Welp, I finally got some pics taken if you guys care, my first mustang, and I love it <3 the first paycheck is going to buy some new speakers, after that I'm open for suggestions, I want to eventually tint the windows but I have trouble saving money and recently all my paychecks have been too small to use one check on it..

[dont worry the leaks on the driveway arent from my car]

 

[ChrisA#5]

awesome, congrats on your first stang. looks real clean. first i'd do a h pipe or x pipe and exhaust, and gears. by the way, what kind of speakers are you looking for? i might be able to help you out. email me at "[email protected]" if you want.

 

[rudeone707]

gears will definately make a big difference, the an o/r h or x pipe. Nice pics but definatly lower her.

 

[SN95StangMan]

Looks good. Thats some nice camera work.

 

[EpiKk3]

thx, id love to lower it her but i figure 150 for springs, then whatever labor is ($100?) would put me around $250 so id like to do some other stuff first

the x / h pipes, is that just for sound and a bit of performance, i dont understand exactly what it is

and the speakers i was probably gunna get were:
http://www.cardomain.com/shop/item.pl?sku=SONXSW5721&vq_id=none
those speakers all around

 

[BlackVert]

thx, id love to lower it her but i figure 150 for springs, then whatever labor is ($100?) would put me around $250 so id like to do some other stuff first

the x / h pipes, is that just for sound and a bit of performance, i dont understand exactly what it is

and the speakers i was probably gunna get were:
http://www.cardomain.com/shop/item.pl?sku=SONXSW5721&vq_id=none
those speakers all around

fwiw, labor is probably more like $250

 

[EpiKk3]

oh gg .. springs move further down the list

 

[stunner6910]

you can do the springs yourself. i've never done them but i've seen threads on here saying that the install isn't too hard.

 

[rudeone707]

you can pick up some C springs for pretty cheap. springs arent that hard at all, so i wouldnt pay anybody to change them for me, takes probably around 2-3 hours.

 

[Nik_95Cobra]

Very Nice...What a great base to start with. Looks really good.

 

[stunner6910]

how's the interior

 

[Silver95Stint]

Good pick up. That black will get you alot of attention, and it looks really clean to be almost 10 years old.

 

[Pops Fun]

Clean looking car ...
Good Luck There is a lot of help on this board.

Steve

 

[94GTLaserRC]

Congrats on the car..CLEAN!
With the Summer Heat coming, I would tint the windows first.
Springs can wait...Gears CANT!

RC

 

[jeffnoel]

I did my first spring install in 3 hours, and that includes a test ride after I installed the back springs which I did first in 1 hour fronts take a little longer. I did the C springs and after a couple weeks the rear still needed to come down more so I pulled them and cut a 1/2 coil from each. Don't waste your hard earned $$ follow these instructions and you'll be OK.

http://www.yellowmustangregistry.com/vogtland.html

 

[EpiKk3]

the inside is almost mint, and the paint is actually better than my moms 01 black suburban

my stepdad is somewhat of a motorhead, he was rebuilding a 55 chevy truck, but hasnt touched it in a while, ill see if he knows anything about springs, itd be a lot nicer to save $250 and learn a thing or two

ill see if i can take some interior pics later, its pouring raining outside and sadly the garage is full =\

also which gears would you recommend and hows the install on them? [im a nub sorry]

 

[viperos]

very nice looking... but you need to amend those 16" things you have now

-let me know if you want some help on what mods work and what ones don't one a 5.0L sn95

 

[AznStanger3v]

thx, id love to lower it her but i figure 150 for springs, then whatever labor is ($100?) would put me around $250 so id like to do some other stuff first

the x / h pipes, is that just for sound and a bit of performance, i dont understand exactly what it is

and the speakers i was probably gunna get were:
http://www.cardomain.com/shop/item.pl?sku=SONXSW5721&vq_id=none
those speakers all around

what is labor??? i havent paid that in ages.....

but seriously, i and about 67 other guys on here could give you step by step instructions to get it done in a flash. my first spring install was about 2 1/2 hours, then my next one was about 55 minutes. all you need are jack stands, a jack, some simple hand tools.....and a lot of PB Blaster. thats how i cut the install time down by more than a half. spray all bolts 2 times a day for 3 days straight and get cracking. oh yeah, i also utilized an electric impact (sucked, but more than enough for that simple ass job). dude, just do it yourself. this is part of being stangnet.

 

[Lostcause]

also which gears would you recommend and hows the install on them? [im a nub sorry]

5 speed 3.73 , auto 4.10. An off road h/x will help that beast out.

 

[94GTLaserRC]

5 speed 3.73 , auto 4.10. An off road h/x will help that beast out.

Lost cause...I didnt know anyone actually lived down there in Homestead..youll have to pass by up here one day!
RC