After driving around for 2 years with my airbag light flashing I finally decided to try and get rid of it. I went to my local Ford dealership and they wanted $200 to fix it! I did a search on this forum and found this link.
http://www.veryuseful.com/mustang/tech/airBag/airBag95.html
Im sure alot of you have been there before. I then read up on code 12 and found out that it is caused because of low voltage caused by a blown 10a fuse. I went through all the 10amp fuses in the fuse box under the steering wheel and found that the one closest to the driver door was blown. I replaced it with another 10 amp fuse and checked the codes again. I then got a Code 53. I used the paper clip method to clear the trouble code using the connector under the glove box. i turned the car on again and now was getting code 64. I cleared that trouble code and now there are no codes at all!
Hope this helps some of you clear your air bag codes.
http://www.veryuseful.com/mustang/tech/airBag/airBag95.html
Im sure alot of you have been there before. I then read up on code 12 and found out that it is caused because of low voltage caused by a blown 10a fuse. I went through all the 10amp fuses in the fuse box under the steering wheel and found that the one closest to the driver door was blown. I replaced it with another 10 amp fuse and checked the codes again. I then got a Code 53. I used the paper clip method to clear the trouble code using the connector under the glove box. i turned the car on again and now was getting code 64. I cleared that trouble code and now there are no codes at all!
Hope this helps some of you clear your air bag codes.