Finally ran the mod coupe!

[AllFordPerf]

I took the modular coupe out last night on slicks for some passes at PIR. Don't have the nitrous finished yet so I ran it all motor. Best was a 12.92 at 105 all motor, backed up with a 12.93 at 103. It Pulled the left front wheel about 6 inches according to people watching the run. I hope to have the nitrous on by saturday and give the new Mickey thompson drag radials a shot at Woodburn for the heads up race.

 

[302fordracer]

great job Jeff...your driving skills never cease to amaze me..Great times!!

 

[The Factor]

Nice runs Jeff!!!

 

[BeenStroked]

Hell yeah! That is the ****nit! Great job, now you just have to hunt down Phil and give him the big shazaam!

 

[gospeedgo]

Word is that Jeffs got a bounty on Phil. $25 to take him out first round, $20 before the finals...or $50 to take him out before the race

 

[WaterPog]

Nice work Jeff, should make things interesting!

 

[SMOKEDYA]

I took the modular coupe out last night on slicks for some passes at PIR. Don't have the nitrous finished yet so I ran it all motor. Best was a 12.92 at 105 all motor, backed up with a 12.93 at 103. It Pulled the left front wheel about 6 inches according to people watching the run. I hope to have the nitrous on by saturday and give the new Mickey thompson drag radials a shot at Woodburn for the heads up race.

So what time at woodburn? and that's next saturday the 2nd? Hey beleive it or not the front wheel's are 15" off the ground on the GT Well supported on jack stand's that is damnit nice run jeff i came over there to the track on my luch friday and seen you in the staging lanes peace



john

 

[loud 95]

I took the modular coupe out last night on slicks for some passes at PIR. Don't have the nitrous finished yet so I ran it all motor. Best was a 12.92 at 105 all motor, backed up with a 12.93 at 103. It Pulled the left front wheel about 6 inches according to people watching the run. I hope to have the nitrous on by saturday and give the new Mickey thompson drag radials a shot at Woodburn for the heads up race.

What size shot are you planning on running?

 

[WaterPog]

The heads up race is next saturday, the 2nd at Woodburn. Gates open at 8:00am, Qualifying should start arround 10:00.

 

[SMOKEDYA]

The heads up race is next saturday, the 2nd at Woodburn. Gates open at 8:00am, Qualifying should start arround 10:00.

And the price to watch? Are the twins comming? peace


john

 

[WaterPog]

I believe it's $10 for spectators.

The Twins are another couple weeks out, the intake will be here monday and I'll be ordering the shocks when I get payed on the 1st (last part, just not enough $$ till the end of the month). Just have to bolt on the intake, fab the final pipe up to the throttlebody and bolt a few things together. Should have everything done when the shocks show up so it'll just be bolting them in and adjusting the suspension before it is good-to-go.

 

[gospeedgo]

July 2 Import & Sport Compact Challenge & Jr. Dragsters.
Event features the Heads Up Northwest Association.
Gates open at 9 a.m., time trials begin at 9:30 a.m.
Racer $25, Jr. Dragster $25, Adult $10, Kid 6-14 $5, under 6 Free.

http://www.woodburndragstrip.com/pages/frame.html

 

[saleenster]

I believe it's $10 for spectators.

The Twins are another couple weeks out, the intake will be here monday and I'll be ordering the shocks when I get payed on the 1st (last part, just not enough $$ till the end of the month). Just have to bolt on the intake, fab the final pipe up to the throttlebody and bolt a few things together. Should have everything done when the shocks show up so it'll just be bolting them in and adjusting the suspension before it is good-to-go.

If that is true, then I might actually get to see you run it this yr. I will be home for 10 days starting July 14th

 

[WaterPog]

Unless something big happens that should work out Cory. At this point i'm trying to decided between going up to the belview show and staying down here to do some T&T on the car. If I had the shocks I could probably squeeze it together in time for this weekend but I'm just not going to push my luck.

How's things accross the pond?

 

[pcinpdx]

Right on Jeff! Sounds like the car ran good on Friday. Sorry I missed out on seeing you run. I'll be looking for ya in my rear view.

...or $50 to take him out before the race

What??? First you guys put in the 273's and now you're pimpin' me out?

 

[AllFordPerf]

What size shot are you planning on running?

The plan is to run a 150 shot on the new NX 4.6L plate system. I may not have the plate by Saturday in which case I will run a 100 shot on a NX shark nozzle.

 

[BeenStroked]

The plan is to run a 150 shot on the new NX 4.6L plate system. I may not have the plate by Saturday in which case I will run a 100 shot on a NX shark nozzle.

I am hoping I will be there Saturday to run true street. It all depends on my work schedule. We might start double shifts, so we will see. The mad thrash is on to get the car ready!

 

[blackholehunter]

I took the modular coupe out last night on slicks for some passes at PIR. Don't have the nitrous finished yet so I ran it all motor. Best was a 12.92 at 105 all motor, backed up with a 12.93 at 103. It Pulled the left front wheel about 6 inches according to people watching the run. I hope to have the nitrous on by saturday and give the new Mickey thompson drag radials a shot at Woodburn for the heads up race.

Congrats Jeff. How much does this car weigh? Sorry, I couldn't resist.

 

[WaterPog]

He told me it was at full weight, 3200lbs.

but then I heard through the grape vine that he had two pigs, a chicken, a goat and Walter in the trunk.

 

[AllFordPerf]

That pass was at an honest 3100lbs. I will have the extra weight in by saturday. I think there may be an extra tenth or two in it when I get the pcm/vss problem solved.