FINALLY SOME ENGINE PICS!!!

Foxfan88 · Jul 2, 2006

here they are, finally got some !
tell me what u think

didnt get many but it gives you an idea of where i am at!

heres the upper i port-matched, and cleaned up a bit, not much. I swapped all stock TB and spacer over so its ready to bolt on! cleaned up and painted it as well as the valve covers!

a shot of the lower intake ports by tmoss! great work and looks amazing! should flow some decent air!

a side view of the new engine ready to drop in! got the headers on not to long ago!

new engine!
View attachment 458920
old engine! a tad filthy!

did a little clean-up on the bay. simple green with a brush and some elbow grease really helps, everything on the bottom used to coated with layers of grease and crap! I also taped up some of the harness i have. used to be all colorful and hanging out everywhere! its not so bad now lol!

let me know what u think!!
i cant wait to get it in!!! cant wait to floor it lol should be a step up.

Marlboro_Man · Jul 2, 2006

Looking good man!

Is this a stock bottom end going in or does it have some goodies? Cam? pistons?

Foxfan88 · Jul 2, 2006

stock rebuilt bottom end! it was a 93 block, i replaced the stock cast hypers with some factory forged from an earlier year engine! only internal change is the B-cam i threw in there, i advanced it 4*, its got thumper heads and the tmoss intake!

Marlboro_Man · Jul 2, 2006

Well yeah that should be a nice step up. The thumper / tmoss combo should really help out.

Good luck and keep us updated, oh and get a pic of the look on your face the first time you drive it!!!

91ghp5.0 · Jul 2, 2006

post up some numbers when you're done...im really quite interested. because I have a Bcam, and I'd love a tmoss porter lower and thumpers.

fox racer · Jul 2, 2006

great job! But do yourself a serious favor... remove and burn those valve cover gaskets. The cork ones suck and are garenteed to leak after a few thousand miles. get the rubber with the metal insert ones, they seal MUCH better and are reuseable. just thought id try to save you some headaches/clean up later on .

have you thought about painting the engine bay or hiding wires while you have all this room?

Foxfan88 · Jul 2, 2006

lol i bought those cork POS for 10 bucks. they do leak lol. last pair i used i caked the silicone on them, it worked but it was a mess. and this time i have valve cover studs, so it would be all over them and be a big mess. I will probably go and get the blue gasket!

it would be cool as hell to hide the wires, but i am no wiring master by any means, andi would probably just get in a big ol mess and get in a bind bad. I think i will steer clear of that this time around.

thanks for the comments!

i am hoping for a high 12 sec pass with good driving and tires, lots of people on here dont think i cant do it. I think i can! if i cant, then some control arms, SFCs TB or massair should get me there!

Bad92GT · Jul 2, 2006

looks good... i was one who said that motor can carry you into 12s.. it very well could but i think it will once you get your suspension setup.. otherwise.. if i were you i'd be happy with a 13.1.. which is where i see you'll hit your first go round.. good luck dude

mattmcdan · Jul 2, 2006

Foxfan88 said:
lol i bought those cork POS for 10 bucks. they do leak lol. last pair i used i caked the silicone on them, it worked but it was a mess. and this time i have valve cover studs, so it would be all over them and be a big mess. I will probably go and get the blue gasket!

it would be cool as hell to hide the wires, but i am no wiring master by any means, andi would probably just get in a big ol mess and get in a bind bad. I think i will steer clear of that this time around.

thanks for the comments!

i am hoping for a high 12 sec pass with good driving and tires, lots of people on here dont think i cant do it. I think i can! if i cant, then some control arms, SFCs TB or massair should get me there!

A 100 shot of the gogo juice will put you there

payupsucka · Jul 2, 2006

Foxfan88 said:
lol i bought those cork POS for 10 bucks. they do leak lol. last pair i used i caked the silicone on them, it worked but it was a mess. and this time i have valve cover studs, so it would be all over them and be a big mess. I will probably go and get the blue gasket!

it would be cool as hell to hide the wires, but i am no wiring master by any means, andi would probably just get in a big ol mess and get in a bind bad. I think i will steer clear of that this time around.

thanks for the comments!

i am hoping for a high 12 sec pass with good driving and tires, lots of people on here dont think i cant do it. I think i can! if i cant, then some control arms, SFCs TB or massair should get me there!

do your self a favor and by the ford racing valve cover gaskets. they dont leak and you can probably put them on you next motor you build.

Roland69 · Jul 2, 2006

looking good foxfan should be a nice setup you got there

mob · Jul 2, 2006

looks great! After a few runs and some traction youll hit 12's.

Reed · Jul 3, 2006

Looking good mob. I can't wait to get into mine! Keep us updated!

edit: Haha, *****! I meant Foxfan. Excellent Foxfan, absolutely excellent!

mob · Jul 3, 2006

Reed said:
Looking good mob. I can't wait to get into mine! Keep us updated!

lol what? you mean foxfan?

MahFiVeOh · Jul 3, 2006

Marlboro_Man said:
.............. oh and get a pic of the look on your face the first time you drive it!!!

So you wanna see his "Oh" face huh

pb_paulie_b · Jul 3, 2006

Good job cleaning the bay. It looks white again

FINALLY SOME ENGINE PICS!!!

Foxfan88

My Grandpa has great wood.

Attachments

Marlboro_Man

Member

Foxfan88

My Grandpa has great wood.

Marlboro_Man

Member

91ghp5.0

Active Member

fox racer

Member

Foxfan88

My Grandpa has great wood.

Bad92GT

The 5 Minute Plan Man

mattmcdan

Member

payupsucka

Member

Roland69

Sergeant Tangnet

mob

the guy who hits on his mom

Reed

New Member

mob

the guy who hits on his mom

MahFiVeOh

pb_paulie_b

Similar threads

FINALLY SOME ENGINE PICS!!!

My Grandpa has great wood.

Attachments

Member

My Grandpa has great wood.

Member

Active Member

Member

My Grandpa has great wood.

The 5 Minute Plan Man

Member

Member

Sergeant Tangnet

the guy who hits on his mom

New Member

the guy who hits on his mom

Similar threads

Privacy & Transparency

Privacy & Transparency